Exhaust Manifold - Dry
Show/hide table
Illustration 1 | g00994403 |
Top view |
Note: Apply 5P-3931 Anti-Seize Compound on the following items on the exhaust manifolds:
- Threads of bolts
- Plugs
- Studs
- Nuts
(1) Bolt
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
Tighten diagonally opposite bolts at the same time.
(2) Clamps
- Torque ...
6.5 ± 2.0 N·m (58 ± 18 lb in)
Apply 5P-3931 Anti-Seize Compound to the bearing surfaces, to the clamp bolt, and to the inside diameter of the clamp.
(3) Heat shield
(4) Stud
- Torque ...
35 ± 5 N·m (25 ± 4 lb ft)
Show/hide table
Illustration 2 | g00994378 |
Section A-A |
(5) Seal
(6) Bolt
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
(7) Cylinder head
(8) Spacer
(9) Cylinder block
Caterpillar Information System:
3512B Marine Auxiliary Engine Engine Oil Pan
G3600 Engines Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
3500 Spark Ignited Engines Exhaust Manifold - Water cooled
Generator Set Control Panel for Switchgear Conversion Related Components
2002/02/01 The Driver's Edition of Pocket Tec TM is Now Available {1900, 7620}
3176C and 3196 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3412C Engine Engine Oil Cooler - Install
Electronic Modular Control Panel II (EMCP II) GSC CID 0566 - FMI 07 (for MUI Engines)
3412C Engine Engine Oil Cooler - Remove
3412C Engine Fuel Injection Pump - Install
G3600 Engines Monitoring System
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0590 - FMI 09
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3056 Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3056 Engine
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Remove - Delphi
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Install - Delphi
Electronic Modular Control Panel II+ (EMCP II+) Instrument Panel
3500B and 3500B High Displacement Generator Set Engines Engine Control Switch (ECS) (EMCP II)
3034 Marine Engine - Installation Guide Engine Mounting
3054 and 3056 Industrial and Generator Set Engines Fuel System - Prime
G3600 Engines Engine Speed/Timing Sensor - Clean/Inspect
120H and 135H Motor Graders Alternate Exit