Engine Oil Cooler - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Inspect the O-ring seals. If O-ring seals (7) and (8) are worn or damaged, use new parts for replacement. Lubricate O-ring seals with clean engine oil or glycerin.
Show/hide table
Illustration 1 | g00578336 |
Show/hide table
Illustration 2 | g00578339 |
- Install O-ring seal (7) in the elbow.
- Clean gasket material from the cylinder block. Install O-ring seal (8) on bonnet (2).
- Install a new gasket (9) on tube assembly (10) .
Show/hide table
Illustration 3 | g00578446 |
- Put engine oil cooler (3) in position and install bolts (4), bolts (6), and bolts (7) .
Show/hide table
Illustration 4 | g00578050 |
- Install bonnet (1) .
Show/hide table
Illustration 5 | g00578083 |
- Fill the cylinder block with coolant. Refer to Operation and Maintenance Manual, "Refill Capacities" in the Maintenance Section.
Caterpillar Information System:
Electronic Modular Control Panel II (EMCP II) GSC CID 0566 - FMI 07 (for MUI Engines)
3412C Engine Engine Oil Cooler - Remove
3412C Engine Fuel Injection Pump - Install
G3600 Engines Monitoring System
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0590 - FMI 09
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0566 - FMI 07 (for PEEC Engines)
G3500 Engines Cylinder Head Valves
320B, 320B L and 320B N Excavators Engine Starting with Jump Start Cables - If Equipped
3500B Marine Propulsion Engines Product Description
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for MUI Engines)
Electronic Modular Control Panel II (EMCP II) GSC CID 0447 - FMI 12 (for EUI Engines)
3412C Engine Fuel Injection Pump Housing - Assemble
3176C and 3196 Engines for Caterpillar Built Machines CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
2002/02/01 The Driver's Edition of Pocket Tec TM is Now Available {1900, 7620}
Generator Set Control Panel for Switchgear Conversion Related Components
3500 Spark Ignited Engines Exhaust Manifold - Water cooled
G3600 Engines Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
3512B Marine Auxiliary Engine Engine Oil Pan
G3500 Engines Exhaust Manifold - Dry
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3054 and 3054B Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Remove - 3056 Engines
3054, 3054B and 3056 Marine Engines Engine Oil Filter Base - Install - 3056 Engine
3054, 3054B and 3056 Marine Engines Fuel Injection Pump - Remove - Delphi