2001/05/14 Caterpillar

Integrated Toolcarrier:

IT14G (S/N: 1WN1-UP)

IT28G (S/N: 8CR1-UP; 9AR1-UP)

Wheel Loader:

914G (S/N: 7ZM1-UP)

924G (S/N: 3PZ1-UP; 9SW1-UP; AAN1-UP)

924GZ (S/N: 3DZ1-UP; 6YW1-UP; AAB1-UP)

928G (S/N: 6XR1-UP; 7SR1-UP)

Disassembly and Assembly, SENR6768-01, "IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train ", "Rim and Tire Installation Procedure"Disassembly and Assembly, SENR1217, "IT28G Integrated Tool Carrier and 928G Wheel Loader Power Train ", "Remove and Install Rim and Tire"Specifications, SENR6765, "IT14G Integrated Tool Carrier and 914G Wheel Loader Power Train", "Rim Group"Specifications, SENR1219, "IT28G Integrated Tool Carrier and 928G Wheel Loader Power Train ", "Rim Group"Specifications, RENR3504, "924G and 924Gz Wheel Loaders Power Train", "Demountable Rim"

Some machines have different torque values on the rim mounting. Later machines have plated mounting hardware for the rim. The plated hardware requires a lower torque. See Table 1 for the torque. Add the additional information to the manuals above.

Table 1

Part Numbers	Type	Torque
8T-5379 Bolt	Plated Hardware	300 ± 40 N·m (221 ± 30 lb ft) (1)
8T-4167 Washer
6V-9199 Bolt	Non-plated Hardware	570 ± 80 N·m (420 ± 59 lb ft) (2)
6V-8327 Washer

( 1 )	Then turn bolts by an additional 60 ± 5 degrees.
( 2 )	Then turn bolts by an additional 60 ± 5 degrees.

Note: Do not combine plated hardware and non-plated hardware. Use only plated washers with plated bolts.