994D Wheel Loader Caterpillar


Backup Alarm - Test

Usage:

994D 3TZ
Putar kunci kontak engine ke posisi ON untuk melakukan pengujian.

Injak service brake. Pindahkan transmisi ke arah mundur.

Alarm mundur harus segera berbunyi. Alarm ini akan terus berbunyi hingga transmisi dipindahkan ke netral atau ke arah maju.




Ilustrasi 1g00403530

Alarm mundur terdapat di belakang machine dekat pengaman fan.




Ilustrasi 2g00108126

Tiga-posisi sakelar pada alarm mundur yang mengatur besar volume alarm.

Alarm mundur ini penyetelannya pada volume suara tertinggi sewaktu machine dikeluarkan dari pabrik. Penyetelan ini sebaiknya tetap pada posisi TINGGI kecuali lokasi kerja mempersyaratkan tingkat suara yang lebih rendah.

Caterpillar Information System:

Instructions for the Installation of the 174-1508 Electric Motor {5927} Instructions for the Installation of the 174-1508 Electric Motor {5927}
621G and 627G Wheel Tractor-Scrapers Machine Systems Evaporator Coil - Remove and Install
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0650 - FMI 02
3456 Engines for Caterpillar Built Machines Engine Sensor Open/Short Circuit - Test
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 06
D5N Track-Type Tractor Power Train General Information
3456 Engines for Caterpillar Built Machines CID 0826 FMI 08 Torque Converter Oil Temperature signal abnormal
3456 Engines for Caterpillar Built Machines CID 0457 FMI 08 Brake Oil Temperature Sensor signal abnormal
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 04 Fuel Level Sensor short to ground
3176C and 3406E Engines for Caterpillar Built Machines CID 0096 FMI 03 Fuel Level Sensor open/short to +batt
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0646 - FMI 05
980G Series II Wheel Loader Engine Supplement Water Temperature Regulator - Remove and Install - Engine in Chassis
621G and 627G Wheel Tractor-Scrapers Hydraulic System Operational Checks
621G and 627G Wheel Tractor-Scrapers Machine Systems Cab - Remove
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0660 - FMI 02
D8R Series II Track-Type Tractor Hydraulic System Bulldozer Tilt Control Valve
D8R Series II Track-Type Tractor Hydraulic System Dual Tilt Control Valve
980G Series II Wheel Loader Steering System Hydraulic Tank
D8R Series II Track-Type Tractor Hydraulic System Implement Control Valve
D7R Series II Track-Type Tractor Engine Supplement Cylinder Head - Install - Engine in Chassis
2001/05/07 Correction to Carrydozer Maintenance Interval Schedule {6060}
980G Series II Wheel Loader Engine Supplement Water Pump - Remove - Engine in Chassis
IT12F, IT14F, IT18F, IT24F and IT28F Integrated Toolcarriers and 910F, 918F, 924F and 928F Wheel Loaders Power Train Electronic Control System MID 081 - CID 0661 - FMI 02
621G and 627G Wheel Tractor-Scrapers Machine Systems Heater Coil - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.