5110B Excavator Machine Systems Caterpillar


Swivel - Assemble

Usage:

5110B AAA

Assembly Procedure

  1. Make sure that all of the parts of the swivel joint are thoroughly clean and free of dirt and debris.


    Illustration 1g00786802

  2. Check the condition of O-ring seal (6) and O-ring seals (8).

  3. Install eight O-ring seals (8) in outside housing (7).

  4. Carefully install outside housing (7) over rotor (9).

  5. Install retainer (5), three washers (4) and three bolts (3). This holds rotor (9) and outside housing (7) together.

  6. Apply clean hydraulic oil on O-ring seal (6). Install the O-ring seal in the outside housing.

  7. Install cover (2) and five bolts (1) that secure the cover.

  8. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in the top of the swivel joint and check the swivel joint for leaks.

End By:

  1. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install".

Caterpillar Information System:

Product Identification Numbers (PIN) Location Guide Excavator (Track)
BA22, BA25 and BA30 Angling Brooms Brooms - BA25
BA22, BA25 and BA30 Angling Brooms Brooms - BA22
311C U Excavator Hydraulic System General Information
311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)
5110B Excavator Machine Systems Track Tension Cylinder - Install
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
315C Excavator Hydraulic System Return Hydraulic System
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
311C U Excavator Hydraulic System Main Hydraulic System
312C Excavator Engine Air Filter Secondary Element - Replace
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust
315C Excavator Fuel Inlet Screen - Clean
5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble
315C Excavator Hydraulic System General Information
315C Excavator Hydraulic System Swivel
Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620} Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.