BA22, BA25 and BA30 Angling Brooms Caterpillar

Brooms - BA25

Usage:

BA25 7AW

Weight with standard brushes ... 390 kg (860 lb)

Working width ... 2500 mm (98.4 inch)

Overall width ... 2700 mm (106.3 inch)

Angled working width ... 2200 mm (86.6 inch)

Amount of angle ... 30° Left or right

Height ... 1300 mm (51 inch)

Diameter of the Brush Cylinder ... 700 mm (27.5 inch)

Minimum RPM of the brush ... 80 RPM

Maximum RPM of the brush ... 450 RPM

Minimum speed of the host machine ... 2 km/h (1 mph)

Maximum speed of the host machine ... 30 km/h (19 mph)

Minimum hydraulic pressure ... 15000 kPa (2175 psi)

Maximum hydraulic pressure ... 26000 kPa (3771 psi)

Minimum oil flow ... 40 L/min (10 US gpm)

Maximum oil flow ... 160 L/min (42 US gpm)

Maximum back pressure ... 14000 kPa (2030 psi)

Power requirement of the water spray system ... 12 volt or 24 volt

Capacity per tank of the water spray system ... 200 L (53 US gal)

Number of water tanks ... 2 or 3 Tanks

Power requirements of the optional electro-hydraulic angling kit ... 12 volt or 24 volt

Caterpillar Information System:

BA22, BA25 and BA30 Angling Brooms Brooms - BA22

311C U Excavator Hydraulic System General Information

311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)

5110B Excavator Machine Systems Track Tension Cylinder - Install

365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust

BA22, BA25 and BA30 Angling Brooms Brooms - BA30

Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}

BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)

315C Excavator Hydraulic System Return Hydraulic System

3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped

315C Excavator Hydraulic System Swing Drive

5110B Excavator Machine Systems Swivel - Disassemble

Product Identification Numbers (PIN) Location Guide Excavator (Track)

5110B Excavator Machine Systems Swivel - Assemble

Product Identification Numbers (PIN) Location Guide Track-Type Tractor

311C U Excavator Hydraulic System Main Hydraulic System

312C Excavator Engine Air Filter Secondary Element - Replace

VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple

VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection

365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil

312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust

315C Excavator Fuel Inlet Screen - Clean

5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble

315C Excavator Hydraulic System General Information