BA22, BA25 and BA30 Angling Brooms Caterpillar

Brooms - BA22

Usage:

BA22 8MZ

Weight with standard brushes ... 380 kg (837.7 lb)

Working width ... 2200 mm (86.6 inch)

Overall width ... 2400 mm (94.5 inch)

Angled working width ... 1900 mm (74.8 inch)

Amount of angle ... 30° Left or right

Height ... 1300 mm (51 inch)

Diameter of the Brush Cylinder ... 700 mm (27.5 inch)

Minimum RPM of the brush ... 80 RPM

Maximum RPM of the brush ... 340 RPM

Minimum speed of the host machine ... 2 km/h (1 mph)

Maximum speed of the host machine ... 30 km/h (19 mph)

Minimum hydraulic pressure ... 15000 kPa (2175 psi)

Maximum hydraulic pressure ... 26000 kPa (3771 psi)

Minimum oil flow ... 20 L/min (5 US gpm)

Maximum oil flow ... 80 L/min (21 US gpm)

Maximum back pressure ... 14000 kPa (2030 psi)

Power requirement of the water spray system ... 12 volt

Capacity per tank of the water spray system ... 200 L (53 US gal)

Power requirements of the optional electro-hydraulic angling kit ... 12 volt

Caterpillar Information System:

311C U Excavator Hydraulic System General Information

311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)

5110B Excavator Machine Systems Track Tension Cylinder - Install

365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust

BA22, BA25 and BA30 Angling Brooms Brooms - BA30

Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}

BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)

315C Excavator Hydraulic System Return Hydraulic System

3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped

315C Excavator Hydraulic System Swing Drive

5110B Excavator Machine Systems Swivel - Disassemble

315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve

BA22, BA25 and BA30 Angling Brooms Brooms - BA25

Product Identification Numbers (PIN) Location Guide Excavator (Track)

5110B Excavator Machine Systems Swivel - Assemble

Product Identification Numbers (PIN) Location Guide Track-Type Tractor

311C U Excavator Hydraulic System Main Hydraulic System

312C Excavator Engine Air Filter Secondary Element - Replace

VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple

VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection

365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil

312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust

315C Excavator Fuel Inlet Screen - Clean

5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble