Track Tension Cylinder - Install
- Fasten a hoist and a suitable lifting sling to track tension cylinder (8). Install track tension cylinder (8) into the machine. Install four bolts (9) and the plated washers. The weight of track tension cylinder is approximately
234 kg (515 lb) .Show/hide tableIllustration 2 g00771925 Right hand view of the left track roller frame - Install tube assembly (7) onto the track tension cylinder and manifold and relief valve (track tension) (4).
Show/hide table
Illustration 3 g00771935 Top view of the left hand track roller frame - Position cover assembly (5) onto the track roller frame. Install eight bolts (6) and the hard washers.
Note: The following procedure shows the removal of the left hand track tension cylinder. The procedure is identical for both sides.
Show/hide table
Illustration 1 | g00773077 |
Left side view of the left hand track roller frame |
Note: The top plate and the left hand plate are removed for viewing purposes.
Caterpillar Information System:
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
315C Excavator Hydraulic System Return Hydraulic System
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
315C Excavator Hydraulic System Swing Drive
5110B Excavator Machine Systems Swivel - Disassemble
315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
315C Excavator Hydraulic System Hydraulic Oil Cooler
315C Excavator Hydraulic System Travel Hydraulic System
311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)
311C U Excavator Hydraulic System General Information
BA22, BA25 and BA30 Angling Brooms Brooms - BA22
BA22, BA25 and BA30 Angling Brooms Brooms - BA25
Product Identification Numbers (PIN) Location Guide Excavator (Track)
5110B Excavator Machine Systems Swivel - Assemble
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
311C U Excavator Hydraulic System Main Hydraulic System
312C Excavator Engine Air Filter Secondary Element - Replace
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil