BA22, BA25 and BA30 Angling Brooms Caterpillar

Brooms - BA30

Usage:

BA30 700

Weight with standard brushes ... 490 kg (1080 lb)

Working width ... 3000 mm (118.1 inch)

Overall width ... 3200 mm (126 inch)

Angled working width ... 2600 m (102.4 inch)

Amount of angle ... 30° Left or right

Height ... 1500 mm (59.1 inch)

Diameter of the Brush Cylinder ... 915 mm (36 inch)

Minimum RPM of the brush ... 80 RPM

Maximum RPM of the brush ... 450 RPM

Minimum speed of the host machine ... 2 km/h (1 mph)

Maximum speed of the host machine ... 30 km/h (19 mph)

Minimum hydraulic pressure ... 15000 kPa (2175 psi)

Maximum hydraulic pressure ... 26000 kPa (3771 psi)

Minimum oil flow ... 70 L/min (19 US gpm)

Maximum oil flow ... 300 L/min (80 US gpm)

Maximum back pressure ... 10340 kPa (1500 psi)

Power requirement of the water spray system ... 24 volt

Capacity per tank of the water spray system ... 200 L (53 US gal)

Number of water tanks ... 3 Tanks

Power requirements of the optional electro-hydraulic angling kit ... 24 volt

Caterpillar Information System:

Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}

BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)

315C Excavator Hydraulic System Return Hydraulic System

3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped

315C Excavator Hydraulic System Swing Drive

5110B Excavator Machine Systems Swivel - Disassemble

315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve

3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped

315C Excavator Hydraulic System Hydraulic Oil Cooler

315C Excavator Hydraulic System Travel Hydraulic System

315C Excavator Hydraulic System Cylinders (Boom, Stick and Bucket)

315C Excavator Hydraulic System Solenoid Valve (Proportional Reducing)

365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust

5110B Excavator Machine Systems Track Tension Cylinder - Install

311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)

311C U Excavator Hydraulic System General Information

BA22, BA25 and BA30 Angling Brooms Brooms - BA22

BA22, BA25 and BA30 Angling Brooms Brooms - BA25

Product Identification Numbers (PIN) Location Guide Excavator (Track)

5110B Excavator Machine Systems Swivel - Assemble

Product Identification Numbers (PIN) Location Guide Track-Type Tractor

311C U Excavator Hydraulic System Main Hydraulic System

312C Excavator Engine Air Filter Secondary Element - Replace

VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple