Swivel - Disassemble
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 8T-4196 | Bolt | 2 |
| 6V-5839 | Washer | 2 | |
| 1P-5546 | Crossblock | 1 | |
| 5P-4168 | Step Plate | 1 | |
| 5F-7366 | Screw | 1 | |
| B | 1P-2420 | Transmission Repair Stand | 1 |
Start By:
- Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Thoroughly clean the outside of the swivel joint prior to disassembly.
Show/hide table
Illustration 1 g00786802 Show/hide table
Illustration 2 g00633841 - Fasten the swivel joint to Tool (B), as shown. The weight of the swivel joint is
115 kg (250 lb) . - Remove five bolts (1) and cover (2) from outside housing (7).
- Remove O-ring seal (6) from outside housing (7).
- Remove three bolts (3), three washers (4), and retainer (5) from rotor (9).
- Use Tool (A) in order to separate outside housing (7) from rotor (9). The weight of outside housing (7) is
52 kg (115 lb) . The weight of rotor (9) is54 kg (120 lb) . - Remove eight O-ring seals (8) from outside housing (7).
Caterpillar Information System:
315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
315C Excavator Hydraulic System Hydraulic Oil Cooler
315C Excavator Hydraulic System Travel Hydraulic System
315C Excavator Hydraulic System Cylinders (Boom, Stick and Bucket)
315C Excavator Hydraulic System Solenoid Valve (Proportional Reducing)
315C Excavator Hydraulic System Solenoid Valve (Hydraulic Activation)
315C Excavator Hydraulic System Gear Pump (Pilot)
315C Excavator Hydraulic System Main Hydraulic System
315C Excavator Hydraulic System Pilot Hydraulic System
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
311C Excavator Window Washer Reservoir - Fill
315C Excavator Hydraulic System Swing Drive
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
315C Excavator Hydraulic System Return Hydraulic System
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
5110B Excavator Machine Systems Track Tension Cylinder - Install
311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)
311C U Excavator Hydraulic System General Information
BA22, BA25 and BA30 Angling Brooms Brooms - BA22
BA22, BA25 and BA30 Angling Brooms Brooms - BA25