Hydraulic Oil Cooler
Show/hide table
 | |
| Illustration 1 | g00786729 |
(1) Inlet line (2) Oil cooler (3) Return line (4) Outlet line | |
The hydraulic oil cooler is mounted in front of the engine radiator. A portion of the return oil from the main control valves flows through the bypass check valve and flows through line (1) to hydraulic oil cooler (2). The hydraulic oil that is cooled by the hydraulic oil cooler flows through outlet line (4), return line (3) and the return filter to the hydraulic tank.
Caterpillar Information System:
315C Excavator Hydraulic System Travel Hydraulic System
315C Excavator Hydraulic System Cylinders (Boom, Stick and Bucket)
315C Excavator Hydraulic System Solenoid Valve (Proportional Reducing)
315C Excavator Hydraulic System Solenoid Valve (Hydraulic Activation)
315C Excavator Hydraulic System Gear Pump (Pilot)
315C Excavator Hydraulic System Main Hydraulic System
315C Excavator Hydraulic System Pilot Hydraulic System
3126B Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
311C Excavator Window Washer Reservoir - Fill
314D Excavator Belts - Inspect/Adjust/Replace
P115, P120, P130 and P140 Mechanical Pulverizers Pins and Bushings - Inspect/Replace
311C Excavator Swing Gear - Lubricate
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
5110B Excavator Machine Systems Swivel - Disassemble
315C Excavator Hydraulic System Swing Drive
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
315C Excavator Hydraulic System Return Hydraulic System
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
5110B Excavator Machine Systems Track Tension Cylinder - Install
311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)