3126B and 3126E On-highway Engines Caterpillar


Inlet Air Temperature Sensor - Remove and Install

Usage:

3126B 1AJ

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01104272

  1. Disconnect harness assembly (2) for inlet air temperature sensor (1).

  2. Remove inlet air temperature sensor (1).

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g01104272

  1. Install inlet air temperature sensor (1). Tighten the inlet air temperature sensor to a torque of 20 ± 5 N·m (15 ± 4 lb ft).

  2. Connect harness assembly (2) for inlet air temperature sensor (1).

Caterpillar Information System:

3126B and 3126E On-highway Engines Atmospheric Pressure Sensor - Remove and Install
PM3516 Power Modules Product Storage
3406E Marine Engine Marine Transmission Oil Cooler - Remove and Install
3306B-XQ200 Rental Generator Set Engine Engine Oil Level - Check
3126B and 3126E On-highway Engines Speed/Timing Sensor - Remove and Install
3406E Marine Engine Marine Transmission Oil Cooler Core - Remove and Install
315C Excavator Boom and Stick Linkage - Lubricate
3126B and 3126E On-highway Engines Engine Oil Temperature Sensor - Remove and Install
C-9 Engines for Caterpillar Built Machines General Information
3126B and 3126E On-highway Engines Boost Pressure Sensor - Remove and Install
3406E Marine Engine Engine Oil Cooler - Assemble
3306B-XQ200 Rental Generator Set Engine Enclosure - Inspect
3304B-XQ125 Rental Generator Set Reference Material
C-9 Engines for Caterpillar Built Machines Basic Engine
C-9 Industrial Engine Gear Group (Front) - Time
2001/02/01 New Cylinder Head Groups Will Provide Improved Reliability {1100, 1103, 1104}
2001/09/01 New Cylinder Head Groups Provide Increased Valve Life {1100, 1103, 1104}
3406E Marine Engine Exhaust Manifold - Remove and Install
3304B-XQ125 Rental Generator Set Electric Starting
3406E Marine Engine Engine Lifting Bracket - Remove and Install
Unpacking Instructions for the Uninterruptible Power Supply{4480} Unpacking Instructions for the Uninterruptible Power Supply{4480}
G3406 Engine Engine Monitoring System
G3516B and G3520B Generator Set Engines Aftercooler - Install
C15 and C18 Generator Set Engines Electronic Unit Injector - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.