Engine Oil Temperature Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect harness assembly (2) for engine oil temperature sensor (1).
- Remove engine oil temperature sensor (1).
Show/hide table
| |
| Illustration 1 | g01104223 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine oil temperature sensor (1). Tighten the engine oil temperature sensor to a torque of
10 ± 2 N·m (90 ± 18 lb in) . - Connect harness assembly (2) for engine oil temperature sensor (1).
Show/hide table
|
| |
| Illustration 2 | g01104223 |
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines General Information
3126B and 3126E On-highway Engines Boost Pressure Sensor - Remove and Install
3406E Marine Engine Engine Oil Cooler - Assemble
3306B-XQ200 Rental Generator Set Engine Enclosure - Inspect
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Electronic Display Module
3126B and 3126E On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Speed/Timing Sensor - Calibrate
3406E and C15 Marine Engines Engine Oil Cooler - Disassemble
2001/02/19 The Booklet, SENR9620, "Improving Fuel System Durability" Is Available {1250}
2001/02/01 Corrections to Operation and Maintenance Manual, SEBU7252-03, "3500B High Displacement Generator Set Engines" {1000, 1900, 7500, 7595, 7595}
C-9 Engines for Caterpillar Built Machines Lubrication System
PM3516 Power Modules Fuel Transfer System - Prime
315C Excavator Boom and Stick Linkage - Lubricate
3406E Marine Engine Marine Transmission Oil Cooler Core - Remove and Install
3126B and 3126E On-highway Engines Speed/Timing Sensor - Remove and Install
3306B-XQ200 Rental Generator Set Engine Engine Oil Level - Check
3406E Marine Engine Marine Transmission Oil Cooler - Remove and Install
PM3516 Power Modules Product Storage
3126B and 3126E On-highway Engines Atmospheric Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines Inlet Air Temperature Sensor - Remove and Install
3304B-XQ125 Rental Generator Set Reference Material
C-9 Engines for Caterpillar Built Machines Basic Engine
C-9 Industrial Engine Gear Group (Front) - Time
2001/02/01 New Cylinder Head Groups Will Provide Improved Reliability {1100, 1103, 1104}