Boost Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (2) for boost pressure sensor (1).
- Remove boost pressure sensor (1).
Show/hide table
Illustration 1 | g01104262 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install boost pressure sensor (1). Tighten the boost pressure sensor to a torque of
10 ± 2 N·m (90 ± 18 lb in) . - Connect harness assembly (2) for boost pressure sensor (1).
Show/hide table
Illustration 2 | g01104262 |
Caterpillar Information System:
3406E Marine Engine Engine Oil Cooler - Assemble
3306B-XQ200 Rental Generator Set Engine Enclosure - Inspect
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Electronic Display Module
3126B and 3126E On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Speed/Timing Sensor - Calibrate
3406E and C15 Marine Engines Engine Oil Cooler - Disassemble
2001/02/19 The Booklet, SENR9620, "Improving Fuel System Durability" Is Available {1250}
2001/02/01 Corrections to Operation and Maintenance Manual, SEBU7252-03, "3500B High Displacement Generator Set Engines" {1000, 1900, 7500, 7595, 7595}
C-9 Engines for Caterpillar Built Machines Lubrication System
PM3516 Power Modules Fuel Transfer System - Prime
3126B and 3126E On-highway Engines Wait To Start Lamp Circuit - Test
3126B and 3126E On-highway Engines Engine Oil Pressure Sensor - Remove and Install
C-9 Engines for Caterpillar Built Machines General Information
3126B and 3126E On-highway Engines Engine Oil Temperature Sensor - Remove and Install
315C Excavator Boom and Stick Linkage - Lubricate
3406E Marine Engine Marine Transmission Oil Cooler Core - Remove and Install
3126B and 3126E On-highway Engines Speed/Timing Sensor - Remove and Install
3306B-XQ200 Rental Generator Set Engine Engine Oil Level - Check
3406E Marine Engine Marine Transmission Oil Cooler - Remove and Install
PM3516 Power Modules Product Storage
3126B and 3126E On-highway Engines Atmospheric Pressure Sensor - Remove and Install
3126B and 3126E On-highway Engines Inlet Air Temperature Sensor - Remove and Install
3304B-XQ125 Rental Generator Set Reference Material
C-9 Engines for Caterpillar Built Machines Basic Engine