Troubleshooting the Kickout for the Implements {5063, 5109, 5112}
- Integrated Toolcarrier:
- IT14G (S/N: 1WN1-UP)
- Wheel Loader:
- 914G (S/N: 9WM1-UP)
- IT28G (S/N: 8CR1-UP; 9AR1-UP)
- 924G (S/N: 3PZ1-UP; 9SW1-UP; AAN1-UP)
- 924GZ (S/N: 3DZ1-UP; 6YW1-UP; AAB1-UP)
- 928G (S/N: 6XR1-UP; 7SR1-UP)
Show/hide table
Illustration 1 | g00447759 |
Place the hydraulic control lever lock in the locked position. |
You must check many components in the kickout system. Do not troubleshoot any components or perform any adjustments until you check the hydraulic control lever lock. Rotate the hydraulic control lever lock FORWARD. The kickout system has been designed for long service life. Early hour failures to components of the kickouts should be considered suspect.
Note: The hydraulic control lever lock locks the hydraulic control levers. The hydraulic control lever lock regulates the power supply to the kickout system. The detents will not operate unless the hydraulic control lever lock is in the fully unlocked position.
Caterpillar Information System:
725, 730 and 730 EJECTOR Articulated Trucks Power Train Retarder - Assemble - The No. 1 Rotating Clutch is included.
RM-250C Reclaimer Mixer Machine Systems Rotor System Troubleshooting
RM-250C Reclaimer Mixer Machine Systems Steering System Troubleshooting
RM-250C Reclaimer Mixer Machine Systems Braking System Troubleshooting
RM-250C Reclaimer Mixer Machine Systems Rotor Drive Lubrication System
RM-250C Reclaimer Mixer Machine Systems Brake Chamber
RM-250C Reclaimer Mixer Machine Systems Quick-Release Valve
RM-250C Reclaimer Mixer Machine Systems Brake Control Valve (Service Brake)
RM-250C Reclaimer Mixer Machine Systems Air Compressor
RM-250C Reclaimer Mixer Machine Systems Braking System
RM-250C Reclaimer Mixer Machine Systems Rotor Depth Control
RM-250C Reclaimer Mixer Machine Systems Rotor
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Remove
3054 and 3056 Industrial and Generator Set Engines Aftercooler - Test
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Tank - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Tank - Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Fan Drive System Troubleshooting
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Fan Drive System (On Demand Fan)
3046 Engine for Caterpillar Built Machines Increased Engine Oil Temperature - Inspect
2001/02/12 Installing Replacement Fenders {7252}
3054 and 3056 Industrial and Generator Set Engines Valve Depth - Inspect
CP-663E, CS-663E and CS-683E Vibratory Compactors Propel System Control Valve (Shift)
725 and 730 Articulated Trucks Power Train Transmission - Calibrate