C-15 and C-16 Industrial Engines Caterpillar


Flywheel

Usage:

MTC855 818

Type 1




Illustration 1g00390312

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)

Type 2




Illustration 2g00285285

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)

Type 3




Illustration 3g00390315

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)

Type 4




Illustration 4g00390316

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 320°C (608°F)

Type 5




Illustration 5g00390317

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 300°C (572°F)

Type 6




Illustration 6g00285281

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 300°C (572°F)

Type 7




Illustration 7g00285288

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

(2) The maximum temperature of the ring gear for installation ... 315°C (600°F)

(3) The bore size in the bushing is the following size. ... 52.007 ± 0.013 mm (2.0475 ± 0.0005 inch)

(4) The diameter of the bushing is the following diameter. ... 72.022 ± 0.015 mm (2.8355 ± 0.0006 inch)

The bore size in the flywheel is the following size. ... 71.971 ± 0.015 mm (2.8335 ± 0.0006 inch)

Type 8




Illustration 8g00762932

Note: Refer to the System Operation, Testing & Adjusting, "Flywheel Runout" for the correct method of flywheel inspection.

(1) Apply 4C-5593 Anti-Seize Compound to the threads of the bolts. Tighten the bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)

Caterpillar Information System:

Installation of the 3406B and 3406C Long Block Engines Installation of the 3406B and 3406C Long Block Engines
C-15 and C-16 Industrial Engines Air Inlet and Exhaust System
Marine Monitoring System II General Information
G3516B and G3520B Generator Set Engines Engine Oil Pump - Remove
C-15 and C-16 Industrial Engines Housing (Front)
2000/12/01 A New Coolant Level Sensor is Available {7422}
C-10, C-12, C-15 and C-16 Industrial Engines CAN Data Link Circuit - Test
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Analog Sensor - Calibrate
3516B Power Package Safety Messages
365B, 365B Series II and 365BL Excavators Window Washer Reservoir - Fill
2000/12/01 A New Boost Pressure Sensor is Available {1917}
3054 Engine Alternator - Test
2000/12/01 The Oil Seals Have Been Removed From The Exhaust Valves {1100}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Relief Valve (Pilot)
3126 Truck Engine Military Pistons and Connecting Rods - Install
C-15 and C-16 Industrial Engines Fuel System
3126B Engines for Caterpillar Built Machines Cylinder Head - Remove
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Walk-Around Inspection
3606, 3608, 3612 and 3616 Engines and C280-12, C280-16, C280-6 and C280-8 Marine Engines Generator Monitoring System Connector Contact Description
2000/12/01 A New Gasket Is Used In An Exhaust Manifold {7555}
G3516B and G3520B Generator Set Engines Engine Oil Pump - Install
C-15 and C-16 Industrial Engines Lubrication System
C-10, C-12, C-15 and C-16 Industrial Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C-15 and C-16 Industrial Engines Cooling System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.