Turbocharger - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose assembly (1) .
Show/hide table
Illustration 1 | g01025728 |
- Disconnect tube assembly (2) .
- Remove nuts (3) and turbocharger (4) .
Show/hide table
Illustration 2 | g01025729 |
Caterpillar Information System:
3054 and 3056 Marine Generator Set Engines Cooling System - Check - Overheating
2000/12/01 Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
3054 Engine Engine Oil Pressure - Test
C-15 and C-16 Industrial Engines Sensors and Electrical Components
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Remove
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Injector Solenoids
3126B Industrial Engine Turbocharger - Install
C4.4 Industrial Engine Fuel Conservation Practices
3126B Industrial Engine Vibration Damper
3054 Engine Engine Oil Pump - Inspect
3126B Industrial Engine Water Pump - Install
3126B Industrial Engine Engine Oil Pressure Sensor - Test
3054 and 3056 Marine Generator Set Engines Cooling System - Inspect
3054 and 3056 Marine Generator Set Engines Cooling System - Test
3054 Engine Cylinder Liner Projection - Inspect
C-15 and C-16 Industrial Engines Reference Material
3126B Engines Basic Engine
322C Excavator Machine System Specifications Track
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Remove
3054 and 3056 Marine Generator Set Engines Cylinder Liner - Install
Marine Monitoring System II Analog Input Module
G3516B and G3520B Generator Set Engines Engine Oil Cooler - Install
3054 Engine Connecting Rod - Inspect
3126E and 3126B Commercial and Truck Engines Engine Storage Procedure - Check