3126B Industrial Engine Caterpillar


Turbocharger - Install

Usage:

SPP101 715

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-3931     Anti-Seize Compound     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


  1. Apply Tooling (A) on the threads of the mounting studs for the turbocharger.



    Illustration 1g01025729

  1. Position the turbocharger gasket and turbocharger (4) on the exhaust manifold. Install nuts (3) .

  1. Tighten the locknuts that fasten the turbocharger to the exhaust manifold.

    Tighten the locknut with the Spiralock thread to the following torque: ... 54 ± 5 N·m (40 ± 4 lb ft)

    Tighten the standard locknut to the following torque: ... 70 ± 5 N·m (50 ± 4 lb ft)




    Illustration 2g01025728

  1. Connect tube assembly (2) .

  1. Connect hose assembly (1) .
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.