Engine Oil Pan
Type 1
Show/hide table
Illustration 1 | g00768248 |
Typical example |
(1) Bolt
- Tighten the bolts to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
(2) Pipe plug
Apply 5P-3413 Pipe Sealant to the threads of the pipe plugs.
(3) Drain plug
- Tighten the drain plug to the following torque. ... 70 ± 15 N·m (52 ± 11 lb ft)
Type 2
Show/hide table
Illustration 2 | g00492776 |
Rear Sump |
(1) Install the O-ring seals for the magnetic drain plugs with the seam against the oil pan. Tighten the magnetic drain plugs to the following torque. ... 70 ± 15 N·m (52 ± 11 lb ft)
Note: Change all O-ring seals and torque all drain plugs at each oil change.
(2) Tighten the bolts that hold the oil pan to the cylinder block to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
Caterpillar Information System:
C-15 and C-16 Industrial Engines Gauges and Indicators
3054 and 3056 Industrial and Generator Set Engines Fuel System Pressure - Test
3500B Engines Turbocharger
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Cat Data Link
3054, 3054B and 3056 Marine Engines Fuel System - Prime
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Analog Sensor Supply
Cross-Reference for Electrical Connectors {7553} Cross-Reference for Electrical Connectors {7553}
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Timing - Check
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Nozzle - Test
3054 and 3056 Industrial and Generator Set Engines Finding Top Center Position for No. 1 Piston
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Getting Started
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets System Overview
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Digital Sensor Supply
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets ECM/Personality Module
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Emergency Stop Switch
3126B Industrial Engine Fuel Filter Base - Remove and Install
3126B Industrial Engine Air Inlet Heater - Remove and Install
3126B Industrial Engine Engine Oil Pan - Remove and Install
3126B Industrial Engine Belt Tightener - Install
3126B Industrial Engine Belt Tightener - Remove
3126B Industrial Engine Vibration Damper and Pulley - Remove and Install
C-10 and C-12 Industrial Engines Air Inlet and Exhaust System
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets Engine Sensor Open/Short Test
C-15 and C-16 Industrial Engines Water Lines