A New Cab Roof Increases Service Life {1429, 1434}
- Integrated Toolcarrier:
- IT14G (S/N: 1WN1521-UP)
- Wheel Loader:
- 914G (S/N: 9WM2071-UP)
- IT28G (S/N: 8CR2865-UP; 9AR758-UP)
- IT38G (S/N: 7BS854-UP; 1CW386-UP)
- 924G (S/N: 3PZ760-UP; 9SW1156-UP; AAN673-UP)
- 924GZ (S/N: 3DZ371-UP; 6YW432-UP; AAB320-UP)
- 928G (S/N: 6XR2623-UP; 7SR1568-UP)
- 938G (S/N: 4YS1656-UP; 6WS2396-UP; 9HS748-UP)
Description of Change: A new roof has replaced the former roof. The new roof is constructed of a new material. The improved design has different fasteners. The new roof eliminates the problems of warping and leaking.
Adaptable To: The new 180-5100 Roof replaces the former 111-0126 Roof. The new roof is not adaptable to former machines. The former roof will still be serviced.
Caterpillar Information System:
CP-663E, CS-663E and CS-683E Vibratory Compactors Seat
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Piston Pump (Hydraulic Fan)
725, 730, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System MID 027 - CID 0739 - FMI 06
D8R Series II Track-Type Tractor Engine Air Filter Secondary Element - Replace
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Service Brake Control - Disassemble
Cross-Reference for Electrical Connectors {7553} Cross-Reference for Electrical Connectors {7553}
2000/12/18 A New O-Ring Seal Reduces Leakage from the End of the Spool {5051}
3408E and 3412E Engines for Caterpillar Built Machines CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
2013/11/06 Lubrication and Maintenance of Drive Shaft Spiders on Articulated Trucks {3251, 3253}
3054 and 3056 Industrial and Generator Set Engines Fuel Injection Timing - Check
2001/02/19 A 201-1261 Transducer Kit Is Available For The Topcon 1G-8990 Sonic Grade Sensor Group and The 0R-4923 Sonic Grade Sensor Group {1408}
RM-250C Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rear Mixing Chamber Door)
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Piston Motor (Hydraulic Fan)
RM-250C Reclaimer Mixer Machine Systems Hydraulic Cylinder (Mixing Chamber Tilt)
HF181, HF201 and HF221 Felling Heads for Track Feller Bunchers Oil Tank (Full Tilt Option) - Check
RM-250C Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rotor Lift)
RM-250C Reclaimer Mixer Machine Systems Hydraulic Cylinder (Steering)
CP-663E, CS-663E and CS-683E Vibratory Compactors Vibratory Control - If Equipped
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
RM-250C Reclaimer Mixer Machine Systems Power Take-Off Clutch
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors User Defined Shutdown Input Circuit - Test
950G Wheel Loader and 962G Wheel Loader Electrohydraulic System Fan Drive Speed (On Demand Fan) - Test and Adjust
CB-534C Vibratory Compactor Engine Starting with Jump Start Cables