2000/10/02 Caterpillar


An Improved 152-8346 Solenoid Valve Group is Available {5479}

Usage:

R1700 II 4LZ
Load Haul Dump (LHD):
R1300 (PIN: 6QW)
R1600 (PIN: 9EW)
R1700 (PIN: 4LZ)
R1700G (PIN: 8XZ)
R2900 (PIN: 5TW)

Description of Change: An improved solenoid valve group is available. The new design has improved moisture integrity and improved vibration resistance. The new design can be identified by the external cover for the wiring. The external cover is made of plastic.

Adaptable To: The 109-3032 Solenoid Valve Group can be replaced by the new 152-8346 Solenoid Valve Group. Both valve groups are interchangeable as a complete unit but the individual components are not interchangeable. The new 152-8346 Solenoid Valve Group is adaptable to the following machines: R1300 (PIN: 6QW1-UP), R1600 (PIN: 9EW1-UP), R1700-127 and Up, R1700G (PIN: 8XZ1-UP) and R2900 (PIN: 5TW1-UP). Refer to Illustrations 1 and 2.




Illustration 1g00743996

109-3032 Solenoid Valve Group




Illustration 2g00743997

152-8346 Solenoid Valve Group

Caterpillar Information System:

2000/10/02 An Improved 152-8339 Solenoid Valve Group is Available {5479}
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Remove
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Injector Solenoid Circuit - Test
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Install
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1190 - FMI 04
RM-250C Reclaimer Mixer Machine Operation Information
797 Off-Highway Truck Air System Air Compressor - Check
725 and 730 Articulated Trucks Secondary Steering - Test
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 03
2000/10/23 A New Deflector Has Been Added to the Mixing Chamber {6635}
2000/10/23 Holes Have Been Added to the Rotor Hood in order to Reduce Buildup of Material {6635}
2000/10/23 Improvements have been made to the Mixing Chamber of the Rotor Hood {5632, 5634, 6635}
2000/10/02 Installation of Larger Lower Lift Arm Bearings Improves Bucket Pin and Bearing Service Life {6107}
2000/10/02 A Gas Spring for the Hood is Available {7251}
2000/10/02 Improved Lower Lift Arm Bearings are Available {6107}
Caterpillar Monitoring System MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System MID 030 - CID 0100 - FMI 08
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Motor (Propel)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Pump - Test and Adjust
AP-1050B and BG-245C Asphalt Pavers Propel Electronic Control Module
3126 Truck Engine Military Rocker Shaft - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines Piston and Rings
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Final Drive Planetary
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Propel Hydraulic System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.