Repair Parts Available for Alternator R-Terminal {1405}
- Engine: Commercial
- All
- Engine: Truck
- All
- All
Reference: Service Magazine, SEPD0447, 07 DEC 98, "Identification of External Terminals on Alternators"
Description
Parts are available for R-terminal repair on the following alternators.
Show/hide table
Description     | Service Manual     | Terminal Kit     | Alternator Part Numbers     |
10-SI/CS-121 Series     | SENB8373     | not serviced     | -     |
20-SI Series     | SENR4978     | 7N-7808     | 7G-7889, 6N-9294, 3T-6352, 5N-5692     |
21-SI Series     | SENR4757     | 132-1230     | 107-7977, 132-2156, 121-4134, 121-4135, 117-1379, 125-9597     |
26-SI Series     | SENR7508     | 9S-2013     | 3E-7577, 112-5041, 3E-7892     |
30-SI Series     | SENR7508     | 9S-2013     | 9X-7803, 114-2401, 4N-3986, 8C-6163     |
Illustration 1 shows a typical R-Terminal repair kit.
Show/hide table
Illustration 1 | g00745166 |
R-Terminal Repair Kit (132-1230) (1) Insulator (2) Washer (3) Nut (No. 8-32 THD) (4) Terminal (No. 8-32 THD) |
Caterpillar Information System:
Assembly and Calibration Procedures for Rack Position Sensors{1911, 1911} Assembly and Calibration Procedures for Rack Position Sensors{1911, 1911}
3054, 3054B and 3056 Marine Engines Exhaust Elbow - Remove and Install
3512B Petroleum Engines with the ADEM 2 Electronic Control Module CAN Data Link
Machine Security System Engine Does Not Start and Status Indicator Is Continuously Red
Electronic Modular Control Panel II (EMCP II) Indicator for Emergency Stop (for MUI 3306B, 3406C Engines)
Electronic Modular Control Panel II (EMCP II) Indicator for Emergency Stop (for EUI and PEEC Engines)
Electronic Modular Control Panel II (EMCP II) SP Fault Code
Electronic Modular Control Panel II (EMCP II) AL Fault Code
Machine Security System Engine Does Not Crank and Status Indicator Is Green
Electronic Modular Control Panel II (EMCP II) Relay Module - Replace
Electronic Modular Control Panel II (EMCP II) Indicator for Overcrank (for PEEC Engines)
Electronic Modular Control Panel II (EMCP II) Indicator for Overcrank (for MUI and EUI Engines)
PM3412C Power Modules Safety Signs and Labels
G3406 Engine Gas Pressure
3054, 3054B and 3056 Marine Engines Fuel Filter Base - Remove and Install - 3056 Engine
PM3412C Power Modules Refill Capacities
PM3412C Power Modules Maintenance Interval Schedule
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Exhaust Manifold
3054, 3054B and 3056 Marine Engines Heat Exchanger - Remove - 3056 Engine
G3406 Engine Turbocharger - Inspect
3176C and 3196 Marine Engines Marine Power Display
C7 Marine Engine Closed Crankcase Ventilation (CCV) Fumes Disposal Filter - Replace
G3406 Engines Cylinder Block
3114, 3116, and 3126 Engines for Caterpillar Built Machines Governor - Install