2000/09/25 Caterpillar


An Improved Tilt Cylinder Guard is Now Available {5104}

Usage:

R1700G 8XZ
Load Haul Dump (LHD):
R1700G (PIN: 8XZ)

Description of Change: An improved tilt cylinder guard is now available. The improved guard for the tilt cylinder now includes a additional gusset for added strength.

Adaptable To: The new 9EP8252 Guard replaces the former 9EP4444 Guard. The 9EP8252 Guard is effective with R1700G (PIN: 8XZ259-UP). The 9EP8252 Guard is adaptable to R1700G (PIN: 8XZ1-258). Refer to Table 1.

Table 1
Qty     New Part Number     Description     Former Part Number    
1     9EP8252     Guard     9EP4444    

Caterpillar Information System:

3114, 3116, and 3126 Industrial and Generator Set Engines Turbocharger - Inspect/Clean
416D Backhoe Loader Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
2000/11/13 Correction to Disassembly and Assembly , "Wheel Brake Assembly" {4251}
TH103 Telehandler Steering System Wheel Alignment - Check and Adjust
2000/10/16 New Caterpillar Seats are Available for Off-Highway Trucks {7324}
TH103 Telehandler Steering System Steering System Pressures - Test and Adjust
TH103 Telehandler Steering System Steering System Troubleshooting
TH103 Telehandler Steering System Metering Pump (Steering)
TH103 Telehandler Steering System General Information
TH62, TH63, TH82 and TH83 Telehandlers Steering System General Information Table
TH62, TH63, TH82 and TH83 Telehandlers Steering System Wheel Alignment - Check and Adjust
TH62, TH63, TH82 and TH83 Telehandlers Steering System Signal Resolver Network - Test
416D Backhoe Loader Hydraulic and Steering System Bank Valve (Backhoe)
797 Off-Highway Truck Hydraulic System Hydraulic Tank
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Stick)(Mechanically Operated)
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 0168 - FMI 03
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Backhoe Bucket)(Mechanically Operated)
IT62G Series II Integrated Toolcarrier Engine Starting with Air Inlet Heater
416D Backhoe Loader Hydraulic and Steering System Control Valve (Swing)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Control Valve (Boom)(Mechanically Operated)
247, 257, 267, 277 and 287 Multi Terrain Loaders and 216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 0168 - FMI 04
2000/09/25 Correction to Electrical System Schematic SENR5897 {7566}
Machine Security System Engine Does Not Crank and Status Indicator Is Green
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Stabilizer - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.