IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Caterpillar


Remote Direction Switch - Disable

Usage:

IT38G 1CW



图 1g00733379

位于仪表板背后的 4 针接头

(1) 4 针接头

  1. 拆卸仪表板。

  1. 断开安装在柱上的换挡杆上的 4 针接头 (1) 。

  1. 将连接针 3(导线 P916)和针 4(导线 202-BK)的跨接线安装在位于换档器上的 4 针接头上。 该跨接线将使换挡器认为远程前进/空档/后退开关始终处于空档。 换挡器将恢复正常工作。

Caterpillar Information System:

IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (ECM) - Replace
2000/09/11 Improved Parts for Purging Brakes are Available {4257}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Pressure Reducing Valve (Measuring Arm Cylinder)
AP-1050B and BG-245C Asphalt Pavers Engine Hour Meter
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shifting
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Install
725 and 730 Articulated Trucks Cab - Tilt
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Assemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0650 FMI 12 Harness Code invalid
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
AP-1050B and BG-245C Asphalt Pavers Screed Travel Lock
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System System Schematic
AP-1000B and BG-260C Asphalt Pavers Propel System Propel Hydraulic System
416D Backhoe Loader Directional Turn Signal Control
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Parking Brake Control
CB-334D and CB-335D Vibratory Compactors Wheel Nuts - Tighten
CB-334D and CB-335D Vibratory Compactors Light Switches
CB-334D and CB-335D Vibratory Compactors Horn
CB-334D and CB-335D Vibratory Compactors Engine Air Filter Service Indicator - Inspect
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electrical Connector - Inspect
CB-334D and CB-335D Vibratory Compactors Engine Crankcase Breather - Clean/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.