0102-07 Boost Pressure not responding
Conditions Which Generate This Code:
The boost pressure is higher than the boost pressure that is required for normal operating conditions.
Note: The diagnostic code indicates a mechanical problem. The ECM and the electronic control system is operating correctly.
System Response:
Boost pressure is set to 0 kPa (0 psi). "DIAG" will be displayed next to the status for "Boost Pressure" on the Caterpillar Electronic Technician (ET). The check engine lamp will illuminate.
The engine may experience low power when the diagnostic code is active.
Test Step 1.
The diagnostic code indicates a problem with the turbocharger, the wastegate, or a pinched turbocharger line. The diagnostic code does not indicate a problem with the ECM or the electronic control system.
Results:
- OK - STOP
Caterpillar Information System:
3126B and 3126E On-highway Engines 0070-06 Inlet Air Heater current high
320B, 320B L and 320B N Excavators Joystick Controls
3126B and 3126E On-highway Engines 0070-05 Inlet Air Heater current low
3126B and 3126E On-highway Engines 0064-11 Secondary Engine Speed no pattern (34)
3126B and 3126E On-highway Engines 0064-02 Secondary Engine Speed loss of signal (34)
3126B and 3126E On-highway Engines 0247-11 Brake Pedal Switch #2 Fault
3126B and 3126E On-highway Engines 0246-11 Brake Pedal Switch #1 Fault
3126B and 3126E On-highway Engines 0110-11 Very High Coolant Temperature (61)
3126B and 3126E On-highway Engines 0110-00 High Coolant Temperature Warning (61)
Oil Mist Detectors Maintenance Schedule
3618 Engine Fuel Injector Synchronization
2000/08/01 Correction to Troubleshooting Guide , "PB-18: Exhaust Brake Relay and AT/MT/HT Transmission Relay Circuits Test" for the 3126B Truck Engine {1093, 1901}
3126B and 3126E On-highway Engines 0164-00 Excessive Injection Actuation Pressure (17)
3126B and 3126E On-highway Engines 0164-02 Injection Actuation Pressure Signal Erratic (15)
3126B and 3126E On-highway Engines 0164-03 Injection Actuation Pressure voltage high (15)
3126B and 3126E On-highway Engines 0164-04 Injection Actuation Pressure voltage low (15)
3126B and 3126E On-highway Engines 0164-11 Injection Actuation Pressure system fault (39)
3406E, C-10 and C-12 Truck Engines Compression Brake
3126B and 3126E On-highway Engines 0190-11 Primary Engine Speed no pattern (34)
JF Series Starting Motor General Information
3126B and 3126E On-highway Engines 0253-14 Truck Manufacturer Parameter Not Programed
3126B and 3126E On-highway Engines 0190-02 Primary Engine Speed Loss of Signal (34)
CPT372 Truck Mounted Pumper Reference Information
3126B Engine for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal