All Wheel Drive and All Wheel Braking Control - If Equipped
Show/hide table
 | |
| Ilustrasi 1 | g00733392 |
Show/hide table
| All Wheel Drive (1) - Tekan sisi kiri sakelar ke posisi HIDUP untuk mengaktifkan all wheel drive. |
All Wheel Drive dapat diaktifkan setiap saat bilamana dibutuhkan adanya tambahan gaya traksi.
All Wheel Drive harus selalu diaktifkan bilamana mengoperasikan mesin pada bidang yang miring.
Show/hide table
| Pengereman All Wheel Drive (2) - Tempatkan sakelar di posisi tengah untuk mengaktifkan Pengereman All Wheel Drive. Mesin akan bekejra dalam mode penggerakan two-wheel drive sampai anda menekan pedal rem. Menekan pedal rem akan mengaktifkan All Wheel Drive. |
Catatan: Untuk mesin-mesin yang diperlengkapi dengan pengemudian dua-roda, anda harus menekan kedua pedal rem pada saat yang bersamaan untuk mengaktifkan Pengereman All Wheel Drive. Pengemudian dengan menggunakan rem masih dapat dilakukan pada mesin dengan pengemudian dua-roda, bilamana anda menekan salah satu pedal rem.
Pengereman All Wheel Drive harus selalu diaktifkan sewaktu menjalankan mesin di jalan raya.
Show/hide table
| MATI (3) - Tekan sisi kiri sakelar ke posisi MATI untuk two-wheel drive. Pengereman All Wheel Drive akan dimatikan sewaktu sakelar berada dalam posisi ini. |
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Seat - Remove and Install
797 Off-Highway Truck Braking System Valve (Unloader)
2000/09/18 The Magnetic Drain Plugs on the Final Drive of 793 Off-Highway Trucks are Longer and Larger {4008, 4050}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission Hydraulic Control Valve - Assemble
797 Off-Highway Truck Braking System Brake Valve (Chassis)
834G Wheel Tractor and 836G Landfill Compactor Machine Systems Main Control Valve - Assemble
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
TH62, TH63, TH82, TH83 and TH103 Telehandlers Power Train Axle Shaft - Remove
TH103 Telehandler Caterpillar Approved Work Tools
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake Air - Purge
416D Backhoe Loader Wheel Nut Torque - Check
416D Backhoe Loader Belts - Inspect/Adjust/Replace
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
C-12, C-15 and C-16 Engines for Caterpillar Built Machines Low Engine Oil Pressure
CB-334D and CB-335D Vibratory Compactors Backup Alarm - If Equipped
CB-334D and CB-335D Vibratory Compactors Battery - Clean/Check
CB-334D and CB-335D Vibratory Compactors Battery - Recycle
2000/08/07 Revision to 3176C Engine Specifications for the R1600 LHD {1100}
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Diagnostic Codes
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission - Disassemble
2000/08/07 New Software Is Available for the Electronic Transmission Control {3168, 7620}
3126B Engines General Information
2000/08/07 A New Door Latch for the Enclosed Cab is Available {7308}