Use of non approved work tools on Telehandler machines could result in injury or death. Before installing a work tool on this machine, ensure that it is approved by Caterpillar and that a Caterpillar load chart covering its use is installed in the machine's cab. |
NOTICE |
---|
When certain work tools are fitted, the work tools can contact the front tires or the front fenders. This situation can occur when the boom is retracted and the work tool is rotated fully forward. Always check for interference when first operating a new work tool. |
The work tools that are listed in these tables are approved by Caterpillar for use on the machines that are covered by this manual. The part number of the work tool is marked on the identification plate for the work tool. Use the following tables to determine that the work tool has been approved by Caterpillar. Additional work tools may have been approved since the publication of this manual. You must consult your Caterpillar dealer before using any work tool that is not in these tables. All work tools must be used in conjunction with the appropriate load chart. Use the following tables to ensure that you are using the correct load chart. You must know the load carrying capacity of these work tools. Make sure that you are using the correct load chart.
Note: The work tools that were available for use with machines that were manufactured from 3PN1-2026 can still be used with machines ; 3PN2027-Up, provided that 180-6137 Adapter Gp is installed on the quick coupler. Refer to Operation and Maintenance Manual, "Work Tool Operation " for information on installing the adapter and using the adapter.
Caterpillar Approved Work Tools(1) | Load Chart | ||
---|---|---|---|
Part Number | Work Tool | North America | Europe |
174-7733 | Standard Carriage | 197-1661 | 174-7660 |
174-7731 | Wide Carriage | 197-1662 | 174-7665 |
174-7729 | Standard Rotating Carriage | 197-1663 | 174-7650 |
174-7727 | Wide Rotating Carriage | 197-1664 | 174-7655 |
169-3945(2) | Boom Extension | 197-1666 | 197-1614 |
169-6460(3) | Lifting Hook | 197-1667 | 197-1615 |
186-5838 | 1.5m3 GP Bucket | 197-1665 | 197-1613 |
(1) | Observe the Local Regulations in certain regions, when you use Caterpillar approved work tools. |
(2) | Changes in Local Regulations prohibit the use of this boom extension in Australia and New Zealand. |
(3) | Changes in Local Regulations prohibit the use of this lifting group in Australia and New Zealand. |