Machine Security System Caterpillar


System Disarm - Program - Security System Bypass

Usage:

143H 1AL
采用以下程序修改安全系统解除的启用时段:

注: 修改 MSS 解除时间需要具有主访问级别的钥匙或出厂密码:

  1. 将具有主访问级别的钥匙插入钥匙起动开关后转到 ON 位置。

  1. 从 ET 的工具栏中选择 "Service/Configuration(维修/配置)"。 这样将使 Configuration(配置)屏幕出现。



    图 1g01097217

  1. 选择希望设置那天的"安全系统解除开始时间"。 按页面底部的 "Change(修改)"按钮。 这将使 "Change Parameter Value(修改参数值)"屏幕出现。

  1. 在提供的区域内输入理想的"开始时间"。 随后单击 "OK" 按钮。

    所有时间均以 24 小时时钟为基础。 如果希望理想的开始时间为 6:00 am,必须输入 06:00。 如果希望理想的开始时间为 6:00 pm,必须输入 18:00。 必须在时间设定值中加入冒号,否则 MSS 将不接受输入。

  1. 选择同一天的"安全系统解除结束时间"。 按页面底部的 "Change(修改)"按钮。 这将使 "Change Parameter Value(修改参数值)"屏幕出现。 在提供的区域内输入理想的"结束时间"后单击 "OK" 按钮。

  1. 对应当具有解除启用时间的所有日期重复步骤 3 到 5。

  1. 要想使 MSS 每天 24 小时处于待命状态,重复步骤 3 到 5,输入 00:00 作为"开始时间",00:00 作为"结束时间"。

    注: 所有时间均以 24 小时时钟为基础。 机器安全系统自动调整夏令时。 如果您所在地区不采用夏令时,则需要重新设定 MSS 内四月第一个周日和十月最后一个周日的时间。 如果您当地启用夏令时的那天与美国不同,则需要重新设定那天的时间。 关于 MSS 日期和时间设定的说明,请参阅测试和调整, "时间 - 设定"。

Caterpillar Information System:

Machine Security System Scheduled Access - "Security System Bypass Times"
Machine Security System System Overview
3126B Engine for Caterpillar Built Machines Fuel Transfer Pump
3508B, 3512B, and 3516B High Displacement Generator Sets Refill Capacities
3126B Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
3126B Engines for Caterpillar Built Machines Alternator - Remove and Install
3500 Engines For Caterpillar Built Power Modules Test Tools for the Cooling System
3126B Engines for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
3126B Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
Machine Security System Lost Key
3508, 3512, and 3516 Generator Sets Overhaul (Top End)
Machine Security System Electronic Control Module (ECM)
Machine Security System Diagnostic Code List
SR4 and SR4B Electric Power Generation Rewind Data Terminology
2000/08/01 New Gaskets, Prechamber Assembly, and Ignition Body Assembly Are Used In Prechamber Groups {1106, 1250, 7555}
3126B Engines for Caterpillar Built Machines Water Pump - Remove
3126B Engines for Caterpillar Built Machines Water Pump - Install
3126B Engines for Caterpillar Built Machines Idler Pulley - Remove and Install
3500 Generator Set Engines Electronic Governors
3126B Engines for Caterpillar Built Machines Front Cover - Remove
3126B Engines for Caterpillar Built Machines Front Cover - Install
3126B and 3126E On-highway Engines Engine Running Output Circuit - Test
3126E On-highway Engine System Overview
PM3500 Power Modules Cooling System Coolant (DEAC) - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.