New Crossover Relief Valves Are Used in the Hydrostatic Pump Group {3203}
- Wheel Loader:
- 914G (PIN: 7ZM1-UP; 9WM1-UP)
- Integrated Toolcarrier:
- IT14G (PIN: 1WN1-UP; 8ZM1-UP)
Description of Change: New crossover relief valves are used in the hydrostatic pump group.
Adaptable To: The new 152-9143 Relief Valve has replaced the former 123-7550 Relief Valve. The new relief valves are used in the 133-1858 Pump Head for the 156-7205 Piston Pump and the 133-1333 Piston Pump .
The new 152-9143 Relief Valve is effective with 914G (PIN: 7ZM682-UP; 9WM1574-UP) machines and with IT14G (PIN: 1WN1142-UP; 8ZM569-UP) machines. The new relief valve is adaptable to all earlier machines.
Caterpillar Information System:
TH103 Telehandler Fuel System Primary Filter - Replace
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Manifold (Tractor)
TH103 Telehandler Stopping the Machine
784B, 784C, 785B, 785C, 785C HAA, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors Variable Speed Fan Drive Fan Drive - Assemble
TH103 Telehandler Operation Information
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader E100 Low Engine Oil Pressure Warning
2000/07/03 Durability of the Radiator has been Improved {1353}
3524B Engines for Off-Highway Trucks Intermittent Engine Shutdown
3406E On-Highway Engine Gear Group (Front) - Install
37-MT, 41-MT, and 42-MT Series Starting Motors Starting Motor - Disassemble - 37-MT and 41-MT
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Electric Drive Pump (Secondary Steering and Brake Release)
420D and 430D Backhoe Loaders Transport Position
JF Series Starting Motor Field Winding - Test
24H Motor Grader Articulation Cylinder Bearings - Lubricate
776D, 777D and 777D HAA Off-Highway Truck/Tractors Hydraulic System Hydraulic System
TH62, TH63, TH82 and TH83 Telehandlers Tire Shipping Pressure
CB-214D, CB-224D and CB-225D Vibratory Compactors Compaction and Rolling Procedure
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Check Valve (Parking Brake Release)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever (Front) and Tilt Link (Front) - Install
D400E Series II Ejector Truck Steering, Suspension, and Ejector Body Hydraulic Systems Manifold (Trailer)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Tilt Lever - Remove
JF Series Starting Motor Starting Motor Does Not Turn or Turns Slowly
Alternator - Delco 27SI Brush Length - Check