2000/06/26 Caterpillar

Off-Highway Truck/Tractor:

784B (PIN: 5RK1-UP)

785B (PIN: 6HK1-UP)

789B (PIN: 7EK1-UP)

793B (PIN: 1HL1-UP)

784C (PIN: 2PZ1-UP)

785C HAA (PIN: 5AZ1-UP)

785C (PIN: 1HW1-UP; APX1-UP)

789C (PIN: 2BW1-UP)

793C (PIN: 4AR1-UP; 4GZ1-UP; ATY1-UP)

797 (PIN: 5YW1-UP)

Wheel Tractor:

854G (PIN: 1JW1-UP)

Wheel Loader:

992G (PIN: 7HR1-UP; ADZ1-UP)

994 (PIN: 9YF1-UP)

994D (PIN: 3TZ1-UP)

Excavator:

5130 (PIN: 7TJ1-UP; 5ZL1-UP)

5130B (PIN: 4CS1-UP)

5230 (PIN: 7LL1-UP)

Reference: User's Manual, FEBJ0047, "VIMSpc99 Vital Information Management System"

There is some confusion on the meaning of the "Ack Time" and the "Ack #" columns of the VIMSpc99 Event Report. The explanation that follows describes the meaning of each column.

Illustration 1	g00716984
A sample of the VIMSpc99 Event Report. (1) "Ack Time" column (2) "Ack #" column

"Ack Time" - This is the time that the event was active from the start of the event until the operator acknowledged the event for the first time.

"Ack #" - This is the number of times that the operator acknowledged the event while the event was active.

An example of "acknowledgment time" is given below:

The "Ack Time" for an event is listed as 50 seconds and the "Ack #" for the same event is listed as 3. The EVENT DURATION is 2 minutes and 27 seconds. This means that the operator waited for 50 seconds out of the total event time of 2 minutes before acknowledging the event. The operator acknowledged the event 3 times.

Print this information and attach this information to page 9-18 of the User's Manual, FEBJ0047, "VIMSpc99 Vital Information Management System".