A New Plate for the Fuse Panel Deflects Rain and Water {7323, 7451}
- Integrated Toolcarrier:
- IT14G (PIN: 1WN1-UP; 8ZM1-UP)
- Wheel Loader:
- 914G (PIN: 7ZM; 9WM)
- IT28G (PIN: 8CR; 9AR)
- IT38G (PIN: 7BS; 1CW)
- 928G (PIN: 6XR; 7SR)
- 938G (PIN: 4YS; 6WS; 8RS; 9HS)
Description of Change: The plate that covers the fuse panel has been changed. The new plate will deflect water from the relays. The plate will reduce the occurrence of corrosion to the relays on machines with open ROPS.
Adaptable To: The 160-6520 Plate replaces the former 114-3951 Plate. See the table for the specific application. Assemble the plate and 14 cm (5.5 inch) of the 126-8472 Seal.
Show/hide table
| Machine with 160-6520 Plate | |
| Model | Instrument Panel |
| IT14G 914G | 118-0806 |
| IT28G 928G | 122-6497 |
| IT28G 928G | 157-0299 |
| IT38G | 141-4067 |
| IT38G 938G | 134-4105 |
Caterpillar Information System:
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Counterweight - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension System
3176C and 3196 Engines For Caterpillar Built Machines Fuel Filter Base - Install
3176C and 3196 Engines For Caterpillar Built Machines Fuel Filter Base - Remove
10-20B Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Extender - Adjust
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Intermittent Low Power or Power Cutout
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Gear Pump
Alternator - Delco 21SI Alternator - Assemble
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Intermittent Engine Shutdown
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Body and Canopy - Install
2000/07/31 A Special Instruction for the Ultrasonic Testing of Brake Bands is now Available {4110}
2000/05/15 A Special Instruction for the Relocation of the Ladder and the Platform is now Available {7254}
2000/05/15 A Special Instruction for the Installation of the 187-6171 Open ROPS Heater Gp is now Available {7304}
3408E and 3412E Engines for Caterpillar Built Machines CID 0091 FMI 00 Throttle Switch not released
143H and 163H Motor Graders Seat - Inspect
3408E and 3412E Engines for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
3408E and 3412E Engines for Caterpillar Built Machines CID 0264 FMI 08 Decel Throttle Position signal abnormal
3126B Engine for Lexion 450, Lexion 460, and Lexion 460 R Combines No Diagnostic Codes Detected
2000/05/22 Correction to Operation and Maintenance Manual, SEBU6652 and to Operation and Maintenance Manual, SEBU7356 for the Transmission Oil {7560, 7581}
C15 and C18 Engines for Caterpillar Built Machines CID 0266 FMI 02 Incorrect Crank-without-inject inputs
2000/06/19 5T-5925 Guide Assembly No Longer Used {7258}
3126B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
2001/05/14 New Keypads Are Used {7490}
228 and 248 Skid Steer Loaders Machine Systems Pump Flow - Test