Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
- Machine Engines:
- 3114
- 3116
- 3126
- 3126B
Features/Benefits
Show/hide table
Illustration 1 | g00947749 |
171-7212 Wear Sleeve |
If the crankshaft hub has extensive damage, the 171-7212 Wear Sleeve can be installed in order to repair the hub. The new wear sleeve can be use as a direct replacement for the 5P-6188 Wear Sleeve. The new sleeve should be used for hubs that require a wider sealing surface in order to repair the damage that has been caused by the front seal. Use the 5P-6208 Sleeve Driver in order to install the sleeve onto the hub.
Caterpillar Information System:
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
3126B Engines Turbocharger - Inspect
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Prelubrication System
3126B Engines Inlet Manifold Pressure - Test
325, 325B and 325L Excavators Swivel
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Injector Solenoids
325, 325B and 325L Excavators Oil Makeup (Travel System)
325, 325B and 325L Excavators Travel Counterbalance Valve
3126B Engines Gear Group (Front) - Time
3126B and 3126E Truck Engine Fuel System Pressure - Test
3126B Engines for Caterpillar Built Machines Turbocharger - Install
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Ether Injection System
C12 Marine Engines Speed/Timing Sensor
2000/07/01 Improved Tube Clips Reduce Vibration of Hydrax Actuator Oil Lines {1307, 1716}
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
3126B and 3126E Truck Engine Engine Oil Pressure Sensor - Test
G3516B Engines MID 036 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
3126B and 3126E Truck Engine Engine Oil Pump - Inspect
3176C and 3196 Engines for Caterpillar Built Machines General Information
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Speed Control
G3406 Engine Reference Material
3176C and 3196 Engines for Caterpillar Built Machines Cooling System
325, 325B and 325L Excavators Relief Valve (Crossover) - Test and Adjust
G3406 Engine Valve Data Sheet