2000/05/01 Caterpillar


New Crankshaft And Camshaft Speed Sensor Groups Available For 1999 And 2000 Model Year Heavy Duty On-Highway Truck Engines {1907}

Usage:

3406E 1MM
Truck Engines:
C-10 (S/N: 3CS)
C-12 (S/N: 2KS)
3406E (S/N: 1MM, 2WS)
C-15 (S/N: 6NZ)
C-16 (S/N: 7CZ)

Description of Change: New speed sensor groups are used on these engines. The new speed sensor groups include a new sensor and a mounting bracket. The mounting bracket was not a part of the former speed sensor groups.

Adaptable To: The new 189-9266 Speed Sensor (Crankshaft Speed Sensor) is available to replace the former 133-0259 Speed Sensor. See Illustration 1. The former speed sensor is cancelled.




Illustration 1g00705203

This illustration shows the orientation of the bracket (A) on the sensor (B) that is in the new 189-9266 Speed Sensor (Crankshaft Speed Sensor).

The new 189-9267 Speed Sensor (3406E, C-15, C-16 Camshaft Speed Sensor) and the new 189-9801 Speed Sensor (C-10, C-12 Camshaft Speed Sensor) are available to replace the former 133-0258 Speed Sensor. The former speed sensor is cancelled. The only difference between the new 189-9267 Speed Sensor (3406E, C-15, C-16 Camshaft Speed Sensor) and the new 189-9801 Speed Sensor (C-10, C-12 Camshaft Speed Sensor) is the orientation of the mounting bracket on the sensor. Illustration 2 and Illustration 3 show the orientation of the mounting bracket on the sensor.




Illustration 2g00704807

This illustration shows the orientation of the bracket (A) on the sensor (B) that is in the new 189-9267 Speed Sensor (3406E, C-15, C-16 Camshaft Speed Sensor).




Illustration 3g00704814

This illustration shows the orientation of the bracket (A) on the sensor (B) that is in the new 189-9801 Speed Sensor (C-10, C-12 Camshaft Speed Sensor).

Caterpillar Information System:

320C Excavator Machine System Specifications Swing Cushion Valve
325, 325B and 325L Excavators Track Roller Mounting
3412 Generator Set Engines Basic Engine
325, 325B and 325L Excavators Track Carrier Roller
G3516B Engines MID 036 - CID 0106 - FMI 03 Air Inlet Pressure Sensor short to +batt
G3516B Engines MID 036 - CID 0100 - FMI 04 Engine Oil Pressure short to ground
G3408 and G3412 Engines Refill Capacities
CPT372 Truck Mounted Pumper Sensors and Electrical Components
G3516B Engines MID 036 - CID 0100 - FMI 03 Engine Oil Pressure open/short to +batt
2000/07/01 Improvements to Turbocharger Water Lines Groups Help Prevent Leaks {1052, 1380}
325, 325B and 325L Excavators Track Roller (Single Flange)
2000/04/01 Use the Proper Electronic Troubleshooting Guide {1000}
G3516B Engines MID 036 - CID 0106 - FMI 08 Air Inlet Pressure Sensor noisy signal
G3408 and G3412 Engines Actuator Control Linkage - Lubricate
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Head Valves
C-10 and C-12 Industrial Engines Cylinder Liner
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Analog Sensor Supply
325, 325B and 325L Excavators Front Idler
325, 325B and 325L Excavators Recoil Spring
G3516B Engines MID 036 - CID 0109 - FMI 08 Engine Coolant Outlet Pressure Sensor noisy signal
G3516B Engines MID 036 - CID 0110 - FMI 03 Engine Coolant Temperature open/short to +batt
325, 325B and 325L Excavators Track Adjuster
G3516B Engines MID 036 - CID 0110 - FMI 04 Engine Coolant Temperature short to ground
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.