Drawbar Ball and Socket End Play - Check/Adjust
检查
转动铲刀,使铲刀处在与机架成90度的位置。 将铲刀降至地面。 当球与支座的负载还很轻的时候,把机器慢慢向后移动。 把机器停下,并关上发动机。
Show/hide table
图 1 | g00701353 |
牵引杆球头和球窝的位置 |
测量牵引杆球头 (3) 与牵引杆盖 (4) 之间轴向间隙。 间隙应为0.6 ± 0.2 mm (.02 ± .01 in)。 需要时,调整间隙。
调整
- 把牵引杆和转盘垫上支承。
- 把用于固定牵引杆和机架承梁的8只螺栓 (1) 卸下。把牵引杆往后移,或使机器往前动。
- 从用于固定牵引杆和接头 (6) 在一起的盖 (4) 上拆下 2只带头螺钉 (2) 。 卸下接头。
Show/hide table
图 2 | g00701356 |
- 需要时,取下垫片 (5) 或装上垫片 (5) 使间隙保持在 0.6 ± 0.2 mm (.02 ± .01 in)。
- 在盖 (4) 和接头 (6) 装上2只带头螺钉 (6) 。用手转动盖 (4) 。 支座应该在球头 (3) 上转动自如。
- 检查用于使牵引杆球 (3) 固定在位的8只螺栓 (7) 的扭矩。 正确的扭矩应为900 ± 100 N·m (664 ± 74 lb ft)。
Show/hide table
图 3 | g00701357 |
- 把牵引杆装在机架承梁上。 拧紧锁紧螺母 (1) 至扭矩为1800 ± 200 N·m (1328 ± 148 lb ft)。
Caterpillar Information System:
24H Motor Grader Engine Start Switch
2000/04/17 The Torque For The Nuts On The Injector Wiring Harness Has Been Increased {1290}
797 Off-Highway Truck Power Train Relief Valve (Rear Axle Motor Unloader) - Disassemble
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Time for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Rear) - Remove and Install
24H Motor Grader Battery Disconnect Switch
Installation Procedure for Motorized Flow Control{5051} Installation Procedure for Motorized Flow Control{5051}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Front) - Remove and Install
3114, 3116, and 3126 Engines Fuel System - Prime
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Blade Valve and Mounting
120H and 135H Motor Graders Circle Drive Pinion Teeth - Lubricate
3034 Engine for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines Fuel System Pressure - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0890 FMI 09 Telemetry Data Link Abnormal Update - Test
120H and 135H Motor Graders Circle Top - Lubricate
3176C and 3196 Engines for Caterpillar Built Machines Camshaft
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Systems Implement and Hitch Valve - Remove - Lever Couplers
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0353 - FMI 00
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Disassemble
2000/07/10 Installation Procedure for Current Counterweights and Deflector {7055, 7056}
2012/01/31 Improved Radio Speaker Assembly Is Now Available for Certain Cat Products {7301, 7338}
24H Motor Grader Engine Air Filter Service Indicator - Inspect