24H Motor Grader Caterpillar


Plate Locations and Film Locations

Usage:

24H 7KK
产品识别号 (PIN) 用来识别动力驱动的、设计由操作员驾驶的机器。

并非为操作员乘坐而设计的卡特彼勒产品,例如发动机、变速箱和主要附件均可通过序列号识别。

为了快速查阅起见,将识别号记录在插图下面的空白处。




图 1g00947561

型号____________________

机器的 PIN ____________________

发动机出厂序号 ____________________

变速箱出厂编号 ____________________




图 2g00701112

变速箱出厂编号 ____________________




图 3g00701114

发动机出厂序号 ____________________

认证书 

滚翻保护结构(ROPS)/落物保护结构(FOPS) 标牌




图 4g00937191

------ WARNING! ------

如果不进行这种认证可能会造成人员伤亡。

不经过这种认证会造成结构被破坏、倾翻、变形,或者不正确的修理可能会影响到ROPS 结构的保护能力。

切勿在结构上焊接或钻孔。

要避免削弱ROPS的性能,在以任何方式更改这种ROPS前请咨询卡特彼勒代理商。 如果ROPS的结构被损坏,其保护性能会被削弱。

咨询 卡特彼勒代理商来确定如果未经认证,ROPS的结构所受的限制。


本机器经过认证,符合验证标牌上的标准。 机器最大质量,包括驾驶员和选装部件但不包括有效载荷,不得超过验证标牌上的质量。

Caterpillar Information System:

834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission and Transfer Gears - Separate
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Assemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
3034 Engine for Caterpillar Built Machines Camshaft - Remove
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Leveling Blade
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643} Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643}
2000/04/24 Rework for Certain Rear Lamp Housing Groups {1429}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Assemble
3034 Engine for Caterpillar Built Machines Camshaft - Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Blade Valve and Mounting
3114, 3116, and 3126 Engines Fuel System - Prime
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Front) - Remove and Install
Installation Procedure for Motorized Flow Control{5051} Installation Procedure for Motorized Flow Control{5051}
24H Motor Grader Battery Disconnect Switch
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Rear) - Remove and Install
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Time for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.