Transmission and Transfer Gears - Separate
分离步骤
开始:
- 卸下变速箱和分动器。 请参阅拆解和组装, "变速箱和分动器 - 拆卸"。
- 卸下变速箱转速传感器。 请参阅拆解和组装, "变速箱转速传感器 - 拆卸"。
- 从输入轴组件拆卸调速器驱动轴 (1) 。
Show/hide table
图 1 | g00645691 |
- 将适当的起吊设备放置在分动器 (3) 上。 将起吊设备固定在起重机上。
Show/hide table
图 2 | g00645693 |
- 卸下 24 只螺栓 (2) 和垫圈。 将 2 只 1/2 in - 13 NC 加压螺栓安装到分动器 (3) 中。 均匀地拧紧加压螺栓。 从变速箱拆卸分动器 (3) 。 分动器 (3) 的重量为 147 kg (325 lb)。
- 从壳体组件拆卸 O 形密封圈 (4) 、 (5) 和 (6) 。
Show/hide table
图 3 | g00645694 |
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Assemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
3034 Engine for Caterpillar Built Machines Camshaft - Remove
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Electronic Technician) - Calibrate
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Leveling Blade
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643} Process for Removal and Installation of Screed Plates and Nose Bars{6640, 6643}
2000/05/08 Correction to Guideline for Reusable Parts and Salvage Operations , "Axle Housing and Final Drive Hub Salvage Procedure for 24H Motor Graders" {3260, 4050}
2000/05/15 The Flash File For The Challenger 85D Has Been Updated {7620}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Work Tool Positioner
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
24H Motor Grader Plate Locations and Film Locations
2000/04/24 Rework for Certain Rear Lamp Housing Groups {1429}
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Assemble
3034 Engine for Caterpillar Built Machines Camshaft - Install
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Blade Valve and Mounting
3114, 3116, and 3126 Engines Fuel System - Prime
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Front) - Remove and Install
Installation Procedure for Motorized Flow Control{5051} Installation Procedure for Motorized Flow Control{5051}
24H Motor Grader Battery Disconnect Switch