3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Caterpillar


MID 036 - CID 0799 - FMI 12 Need Service tool update

Usage:

854G 1JW
Conditions Which Generate This Code:

The Personality Module is for a different engine family, a different engine, or a different application. The diagnostic code 253-02 is active.

An attempt is made in order to reset the interlock code with an old version of the Electronic Technician (ET).

The software for the service tool MUST be updated before the service tool can reset the ECM interlock with factory passwords.

System Response:

The CID-FMI is not logged in memory. The diagnostic code 253-02 will always be active when this diagnostic code is active. The CID-FMI may be viewed on a display module or the Cat ET.

Test Step 1. Perform the following test: ECM/Personality Module

Results:

  • OK - Stop.

  • REPAIRED, OK - Stop.

Caterpillar Information System:

CS-531D, CP-533D and CS-533D Vibratory Compactors Ether Starting Aid Cylinder - Replace
24H Motor Grader Power Train Transfer Gear (Input) - Adjust
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install
24H Motor Grader Power Train Transfer Gear (Output) - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0356 - FMI 03
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Brake Valve (Parking and Secondary) - Install
24H Motor Grader Power Train Differential and Bevel Gear - Adjust
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System Electronic Control Module (ECM) - Flash Program
12H Motor Grader Centershift Lock Bar - Clean/Lubricate
24H Motor Grader Power Train Final Drive Bearings - Adjust
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0355 - FMI 06
CS-531D, CP-533D and CS-533D Vibratory Compactors Ether Starting Aid
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0356 - FMI 05
325D and 329D Excavators Hydraulic System Pilot Valve (Travel)
2000/08/21 Correction to Service Magazine , "Add Gussets To Strengthen Differential Case Assembly Side Plates If Weld Cracks Are Found In Seams" {3283}
988G Wheel Loader Braking System Hydraulic Oil Contamination - Test
CS-431C, CP-433C and CS-433C Vibratory Compactors Auxiliary Hydraulic System Steering Pump and Mounting
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0356 - FMI 06
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0357 - FMI 03
3114, 3116, and 3126 Engines Engine Speed - Check
CS-531D, CP-533D and CS-533D Vibratory Compactors Drum Support Oil Sample - Obtain - CS-531D Machine Only
CS-531D, CP-533D and CS-533D Vibratory Compactors Drum Support Oil - Check - CS-531D Machine Only
980G Wheel Loader, 824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Implement Electronic Control System MID 082 - CID 0357 - FMI 05
CS-531D, CP-533D and CS-533D Vibratory Compactors Drum Support Oil - Change - CS-531D Machine Only
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.