Main Bearings - Inspect
Show/hide table
图 1 | g00720890 |
检查主轴承有无剥落、熔化、咬合或接触不良。 如果主轴承磨损或损坏,请更换主轴承。
- 测量主轴承与曲轴轴颈之间的间隙。
- 在位置 (1) 和 (2) 处以方向 (A) 和 (B) 测量主轴承。 有关公差的信息,请参阅技术规格单元, "缸体"主题。
Caterpillar Information System:
G3516B Engines Engine Shutdown without a Diagnostic Code
3116 and 3126 Truck Engines Fan Drive - Assemble
3116 and 3126 Truck Engines Fan Drive - Disassemble
797 Off-Highway Truck Upper and Lower Link (Suspension) - Disassemble
3612 and 3616 Engines Fuel Setting
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Block - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Connecting Rod Bearings - Inspect
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Assemble
797 Off-Highway Truck Control Valve (Hoist and Brake Cooling) - Disassemble
3612 and 3616 Engines Heinzmann Governor
3612 and 3616 Engines Woodward 3161 Governor
3126 Truck Engine Military Vibration Damper and Pulley - Remove and Install
325D and 329D Excavators Hydraulic System Stick Drift Reduction Valve
345B Excavator Engine Air Filter Primary Element - Clean/Replace
3114, 3116, and 3126 Engines Lubrication System
3500B Engines Auxiliary Water Pump - Remove - Auxiliary Pump
3500B Engines Auxiliary Water Pump - Install - Auxiliary Pump
3114, 3116, and 3126 Engines for Caterpillar Built Machines Turbocharger - Remove
3618 Engine Fuel Transfer Pump - Assemble
3618 Engine Connecting Rod
G3516B Engines Intermittent Engine Shutdown
G3516B Engines Electronic Service Tool Will Not Communicate with ECM - The Caterpillar Electronic Technician (ET) Will Not Communicate With the Electronic Control Module (ECM) and/or the Integrated Temperature Sensing Module (ITSM)
Disassembly and Assembly of the TPL61 Turbocharger{1052} Disassembly and Assembly of the TPL61 Turbocharger{1052}
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0076</B> Generator through <B>5N-0090</B> Generator