Dimensions in Special Instruction are now Updated {3260, 3269, 6116, 6118, 6119, 6125, 6126, 6127, 7057, 7069, 7100}
- Integrated Toolcarriers:
- IT12F (PIN: 1KF)
- Wheel Loaders:
- 902 (PIN: 7ES)
- IT14B (PIN: 3NJ)
- IT14F (PIN: 4EL)
- IT14G (PIN: 8ZM; 1WN)
- IT18B (PIN: 4ZD; 1DF; 2NJ)
- IT18F (PIN: 6ZF; 5EJ; 8GJ)
- IT24F (PIN: 4NN; 6KN)
- IT28B (PIN: 5SD; 1HF; 1JK)
- IT28F (PIN: 1JL; 3CL)
- IT28G (PIN: 8CR; 9AR)
- 906 (PIN: 6ZS)
- 908 (PIN: 8BS)
- 910E (PIN: 1SF; 1YK)
- 910F (PIN: 1SF; 1YK)
- 914G (PIN: 7ZM; 9WM)
- 916 (PIN: 2XB; 9WB; 5KC)
- 918F (PIN: 3TJ; 2CK; 5DL)
- 920 (PIN: 41J; 62K)
- 924F (PIN: 4YN; 5NN; 6MN; 7PN)
- 926E (PIN: 4NB; 8NB; 94Z)
- 928F (PIN: 8AK; 2XL; 7YM)
- 928G (PIN: 6XR; 7SR)
- 930 (PIN: 41K)
The Special Instruction, REHS0276, "Dimensions fo Articulated Hitches, Lift Arms, Front and Rear Levers, and Oscillating Rear Axle Assemblies," has been updated.
Several dimensions for critical pin bores on the hitches for the following machines have been expanded for greater accuracy: IT18F, IT24F, IT28F, 902, 906, 918F, 924F and 928F.
The updated Special Instruction, REHS0276 can be obtained through the normal literature ordering channels. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Brake Release)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Torque Converter Charging, Scavenge, and Brake Release)
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 12 Electronic Control Module (Machine) Failed - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 09 Electronic Control Module (Machine) Abnormal Update - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller Input and Output Values
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0295 FMI 02 Electronic Control Module (Machine) Incorrect Signal - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Controller - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Speed Sensor - Replace
793C Off-Highway Truck Throttle Backup Switch
793C Off-Highway Truck Traction Control System (TCS) - Test
CB-534C Vibratory Compactor Fuel System Water Separator Element - Replace
CB-534C Vibratory Compactor Fuel System Water Separator - Drain
2000/05/01 A Guard for the Transmission Breather Can Be Installed {7153}
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Hoist)
3618 Engine Main Bearings
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Gear Pump (Pulled Unit)
2000/03/20 A New Indicator Assembly (Voltmeter) {7450}
2000/03/27 Maintenance and Repair to a Closed Loop System for the Engine Crankcase Breather {1107, 1317}
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System General Information
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Propel System Front Wheel Drive Manifold
D400E Series II Ejector Truck After Starting Engine
D400E Series II Ejector Truck Cold Weather Operation
D400E Series II Ejector Truck Starting Above 0°C (32°F)
D400E Series II Ejector Truck Loading