325D and 329D Excavators Caterpillar


Fuel Tank Cap and Strainer - Clean

Usage:

325D L A3R


Illusztráció 1g00824193

  1. Vegye le az üzemanyagtartály zárófedelét.

  2. Ellenőrizze, hogy tömítés (4) nem sérült-e. Szükség esetén cserélje ki a tömítést.

  3. Vegye ki a csavarokat (1), a szűrőegységet (2), a leeresztő szelepet (3) és a tömítéseket.


    Illusztráció 2g00824196

    Megjegyzés A folyadékok kiömlésének megakadályozására lásd: Használati és kezelési útmutató, "Veszélyhelyzetekkel kapcsolatos általános tudnivalók".

  4. Vegye ki a betöltő nyílásban található szűrőt.

  5. Mossa meg a szűrőt és az üzemanyagtartály zárófedelét tiszta, nem gyúlékony oldószerben.

  6. Szereljen be új szűrőkészletet a zárófedélnél. Szerelje vissza a tömítéseket, a leeresztő szelepet (3), a szűrőegységet (2), és a csavarokat (1).

  7. Tegye be a szűrőt a betöltő cső nyílásába.

  8. Helyezze vissza az üzemanyagtartály zárófedelét.

Caterpillar Information System:

Electronic Modular Control Panel II+ (EMCP II+) Spare Input/Output Programming OP6 - For EUI And PEEC Engines
2000/04/01 New Water Pump Group Includes Many Improvements {1361}
P16, P20, P25, P28, P40 and P60 Pulverizers Hydraulic Cylinder - Remove
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test - PEEC Engines Only
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test - EUI Engines Only
3406C Truck Engine Engine Cranks but Will Not Start
797 Off-Highway Truck Power Train Rear Wheel and Differential Fastener
3406C Truck Engine Coolant Temperature Below Normal
3512 and 3516 EUI Engines for Caterpillar Built Machines Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
325D and 329D Excavators Engine Air Filter Secondary Element - Replace
325D and 329D Excavators Cooling System Coolant Level - Check
321B LCR Excavator Cooling System Coolant Extender (ELC) - Add
3408E and 3412E Industrial Engines CAT Data Link Circuit - Test
723PLUS Digital Speed Control Control Specifications
G3516B Engines System Overview
3524B Engines for 797 and 797B Off-Highway Trucks General Information (Fuel System) - Diesel
3054 Engine Compression - Test
3612 and 3616 Engines Fuel Injector Testing
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Remove
2000/03/01 Be Sure The 163-6108 Timing Control (G3412) And 163-6164 Timing Control (G3408) Is Correctly Installed On Engines Equipped With The CAT Digital Ignition System {1901}
3612 and 3616 Engines Engine Rotation
P16, P20, P25, P28, P40 and P60 Pulverizers Crushing Arm - Install
797 Off-Highway Truck Power Train Relief Valve (Transmission Lubrication)
3612 and 3616 Engines Finding the Top Center Position for the No. 1 Piston
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.