Engine Monitoring System
电子控制模块(ECM)为该发动机提供了一个综合、可编程的发动机监控系统。 ECM 监控指定的发动机操作参数,以检测可能会发生的异常情况。 如果指定的操作参数超出了可接受范围,ECM 会有所动作。 ECM 将会根据该情况的严重程度做出反应。 ECM 可能会启动下列动作:
- 点亮警告灯或警告报警
- 发动机减额
- 发动机保护停机
注: 在一定参数或应用情况下,上述动作可能会不启动。
在多数应用中,可使用 Cat® 电子技师(ET)调节监控系统参数的触发值和延长时间。 有关编程这些参数的具体信息,请参阅故障诊断与排除, "事件代码"。
Caterpillar Information System:
3176C and 3196 Marine Engines Exhaust Manifold - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Cat Data Link
3176C and 3196 Marine Engines Air Cleaner - Remove and Install
3512B and 3512C Engines For Caterpillar Built Machines Load Feedback Capability
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Customer Parameters Worksheet
C15 and C18 Petrolem Generator Set Engines Factory Passwords
3176C and 3196 Marine Engines Aftercooler - Install
Replacing the Transformer in the Automatic Transfer Switch{4469} Replacing the Transformer in the Automatic Transfer Switch{4469}
3176C and 3196 Industrial Engines Cylinder Head - Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Check Engine Lamp Circuit - Test
3176C and 3196 Marine Engines Aftercooler - Remove
G3406 Engine Charging System
3516B Engine for Caterpillar Built Machines Symptoms
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Can Not Reach Top Engine RPM
3176C and 3196 Marine Engines Heat Exchanger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
2000/02/01 Solenoid Available To Service Hydrax Actuators {1259}
3176C and 3196 Marine Engines Heat Exchanger - Install
3508B Industrial Engines Turbocharger
3176C and 3196 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3176C and 3196 Marine Engines Water Outlet Manifold - Remove
3126B Engines Finding Top Center Position for No. 1 Piston
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Cranks but Will Not Start
2000/02/01 Revised Oil Level Gauge Calibration Chart for 3412E Marine Engines {1326}