Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
- Engines:
- 3196 (S/N: 1DW1-UP; 2XR1-UP)
- 3176C (S/N: 1WZ1-UP; 2AW1-UP; 5DZ1-UP; 6BW1-UP; 9KZ1-UP)
Plastic cards that contain the revised procedure for tightening the cylinder head bolts on these engines will be distributed by mail to the subscribers of Caterpillar Engine News. These durable plastic cards are a handy reference for technicians. The plastic cards are designed to be kept in the technician's tool box. The plastic cards contain the illustrations, torque values, and the step by step instructions for tightening the cylinder head bolts.
Caterpillar Information System:
2000/01/01 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901} Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901}
2000/01/17 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
3500 Generator Set Engines Auxiliary Drive Pulley
2000/01/01 Correction to Specifications Module, SENR5117-03, "3116 Diesel Truck Engine" {1201}
3176C and 3196 Marine Engines Turbocharger - Remove
3500B Engines for Caterpillar Built Power Modules Test for the Water Temperature Regulator
2000/02/07 New Oil Filter Base Group {1306}
Electronic Modular Control Panel II+ (EMCP II+) Normal Mode
3608 Engine Fuel System Operation
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator - Test
3500B Engines Cylinder Head
3176C and 3196 Marine Engines Turbocharger - Install
3176C and 3196 Marine Engines Valve Mechanism Cover - Remove and Install
3176C and 3196 Marine Engines Rocker Shaft and Pushrod - Remove
2000/02/01 Correction To Troubleshooting, SENR5015-00 {1000}
3176C and 3196 Marine Engines Inlet and Exhaust Valve Springs - Remove and Install
3176C and 3196 Marine Engines Inlet and Exhaust Valves - Remove and Install
3176C and 3196 Marine Engines Electronic Unit Injector Sleeve - Install
3176C and 3196 Marine Engines Cylinder Head - Remove
2000/01/01 New Idler Pulley Now Available {1358}
3512B Petroleum Engines High Coolant Temperature
2000/02/01 Shorter Bolts For Mounting The Radiator Support Brace To The Radiator Top Tank Are Used {1353}
3176C and 3196 Marine Engines Inlet and Exhaust Valve Guides - Remove and Install