3500B Engines Caterpillar


Cylinder Head

Usage:

3516B 1NW
缸盖上有气门座镶圈、气门导管和气门桥定位销,在这些零件发生磨损或损坏时可将其拆下。 请参考拆解和组装以了解这些部件的更换情况。

气门

使用 1P-3527 气门弹簧压缩器可使气门的拆卸和安装变得更加容易。

气门座镶圈

使用 166-7441 气门座拔取器工具来进行气门座镶圈的拆卸和安装。 在镶圈装入缸盖之前,先降低其温度。

气门导管

拆卸和安装气门导管的工具是 5P-1729 气门导管衬套和 7M-3975 气门导管冲头。 冲头衬套中的沉孔可将导管安装到正确高度。

气门导管孔的检查

使用 5P-3536 气门导管量表总成以检查气门导管孔。 请参阅工具中附带的说明书。



图 1g00285313
5P-3536 气门导管量表总成

气门桥定位销

使用 5P-0944 定位销拉拔器总成和 5P-0942 定位销拔取器。 拆下气门桥定位销。 使用 6V-4009 定位销冲头安装一个新的气门桥定位销。 此定位销冲头可将气门桥定位销安装到正确高度。

Caterpillar Information System:

3608 Engine Sea Water Cooling System Operation
3176C and 3196 Marine Engines Electronic Unit Injector Sleeve - Remove
3176C and 3196 Marine Engines Electronic Unit Injector - Install
723PLUS Digital Speed Control Watch Window PC Interface
723PLUS Digital Speed Control Programmable Parameters
3176C and 3196 Marine Engines Electronic Unit Injector - Remove
2000/02/01 New Oil Filter Base Group {1306}
3176C and 3196 Marine Engines Fuel Transfer Pump - Remove and Install
723PLUS Digital Speed Control Installation Checkout Procedure
2000/02/01 Throttle Synchronization Wiring for Electronic Marine Engines {1900}
2000/02/01 Software Part Number Reference in TMI {7620}
2000/02/01 New Software for 3412C PEEC III Engines {7620}
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator - Test
3608 Engine Fuel System Operation
Electronic Modular Control Panel II+ (EMCP II+) Normal Mode
2000/02/07 New Oil Filter Base Group {1306}
3500B Engines for Caterpillar Built Power Modules Test for the Water Temperature Regulator
3176C and 3196 Marine Engines Turbocharger - Remove
2000/01/01 Correction to Specifications Module, SENR5117-03, "3116 Diesel Truck Engine" {1201}
3500 Generator Set Engines Auxiliary Drive Pulley
2000/01/17 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901} Programming The Electronic Ignition System (EIS) Control Module For The Manifold Air Pressure (MAP) Sensor.{1408, 1901}
2000/01/01 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
2000/01/01 Plastic Cards With The Revised Procedure For Tightening Cylinder Head Bolts Will Be Distributed By Mail {1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.