General Information (Electronic Control System)
Either too much fuel or not enough fuel for combustion can be the cause of a problem in the fuel system. Work is often done on the fuel system when the problem is really with some other part of the engine. The source of the problem is difficult to find, especially when smoke comes from the exhaust. Smoke that comes from the exhaust can be caused by a faulty fuel injector. Smoke can also be caused by one or more of the reasons that follow:
- Not enough air for good combustion
- An overload
- Oil leakage into combustion chamber
- Altitude
- Air inlet and exhaust leaks
Caterpillar Information System:
Customer Communication Module (CCM) for Diesel Engines System - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines M5X Protocol - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines Diagnostic Code - Troubleshoot
2000/01/01 Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
3408E and 3412E Engines for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed signal abnormal
3408E and 3412E Engines for Caterpillar Built Machines CID 0190 FMI 07 Primary Speed Sensor misinstalled
723PLUS Digital Speed Control Electrostatic Discharge Awareness
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0190 FMI 02 Loss of Engine Speed Signal
3516B Generator Set Engines with Dynamic Gas Blending Electrical System Operation
3500B and 3500B High Displacement Generator Set Engines Camshaft
3500B and 3500B High Displacement Generator Set Engines Crankshaft
3126B and 3126E On-highway Engines Camshaft - Install
723PLUS Digital Speed Control Installation
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines CID 0263 FMI 03 Digital Sensor Supply short to +batt
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Utility Inverter Module - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Engine Speed/Timing Sensor - Remove and Install
2000/01/31 Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-10, C-12, C-15 and C-16 Industrial Engines CID 0263 FMI 04 Digital Sensor Supply short to ground
G3412C, G3508, G3512, G3516, G3606, G3608, G3612 and G3616 Engines Customer Communication Module Diagnostic Code - Troubleshoot
G3412C, G3508, G3512, G3516, G3606, G3608, G3612 and G3616 Engines Customer Communication Module System - Troubleshoot
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3512B Petroleum Engines Fuel System Operation