CID 0190 FMI 07 Primary Speed Sensor misinstalled
Conditions Which Generate This Code:
The primary engine speed/timing sensor is connected to the harness connector for the secondary engine speed/timing sensor.
System Response:
The code is logged.
- The engine will not start.
- Engine shutdown
Test Step 1.
Check for the correct installation of the sensors. Correctly install the connectors for the engine speed/timing sensors. Verify that the original problem is resolved.
Results:
- OK - STOP
Caterpillar Information System:
723PLUS Digital Speed Control Electrostatic Discharge Awareness
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0190 FMI 02 Loss of Engine Speed Signal
3516B Generator Set Engines with Dynamic Gas Blending Electrical System Operation
3500B and 3500B High Displacement Generator Set Engines Camshaft
3500B and 3500B High Displacement Generator Set Engines Crankshaft
3126B and 3126E On-highway Engines Camshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines CID 0190 FMI 03 Engine Speed open/short to + batt
Uninterruptible Power Supply (UPS) 250 Fuse - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines CID 0175 FMI 04 Engine Oil Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0174 FMI 04 Fuel Temperature short to ground
3114, 3116 and 3126 MUI Engine Governors Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3408E and 3412E Engines for Caterpillar Built Machines CID 0190 FMI 08 Engine Speed signal abnormal
2000/01/01 Disassembly And Assembly Of Main Bearings For Journals Without Oil Holes {1203}
Customer Communication Module (CCM) for Diesel Engines Diagnostic Code - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines M5X Protocol - Troubleshoot
Customer Communication Module (CCM) for Diesel Engines System - Troubleshoot
3512B Petroleum Engines General Information (Electronic Control System)
723PLUS Digital Speed Control Installation
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-10, C-12, C-15 and C-16 Industrial Engines CID 0263 FMI 03 Digital Sensor Supply short to +batt
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Utility Inverter Module - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Engine Speed/Timing Sensor - Remove and Install
2000/01/31 Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}