2000/01/01 Caterpillar


Corrections to Operation and Maintenance Manual, SEBU6759-02 , "Maintenance Interval Schedule" and Corrections to Operation and Maintenance Manual, SEBU6759-02 , "Maintenance Recommendations" {7519}

Usage:

3512 1LM
Industrial Engines:
3512 (S/N: 1LM1-UP)
Operation and Maintenance Manual, SEBU6750-02, "3512 Industrial Engine". This module is part of Service Manual, SENR6585, "3512 Industrial Engines (1LM1-Up)".

On Page 63 in the Maintenance Interval Schedule, the interval "Every 18 000 Service Hours" is not correct. This interval should be "Every 8000 Service Hours".

On Page 64 in Maintenance Recommendations, Table 32 is not correct. In the table, the interval "Major overhaul (18,000 service hours)" is not correct. This interval should be "Major overhaul (8000 service hours)".

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 03 Injector Actuation Pressure voltage high
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 04 Engine Coolant Temperature short to ground
723PLUS Digital Speed Control Software Options
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
723PLUS Digital Speed Control Hardware Options
3176C and 3196 Marine Engines Engine Oil Filter Base
2000/01/01 Cooling System Venting Procedure {1350}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 13 Engine Oil Pressure calibration required
723PLUS Digital Speed Control Control Options
3176C Engine Maintenance Interval Schedule
3408E and 3412E Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0174 FMI 03 Fuel Temperature open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines CID 0168 FMI 00 System Voltage High
723PLUS Digital Speed Control Accessories
2000/02/01 New Oil Filter Base Group {1306}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Inverter Module - Remove and Install
Uninterruptible Power Supply (UPS) 250 Contactor - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0174 FMI 04 Fuel Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.