Software Options
There are options in the control that allows flexibility for the application of the hardware. The software has typical adjustments for these functions: speed rates, limits and dual dynamics. Additionally, the software allows these other functions:
- two methods of sensing speed
- filtering of speed
- external limit on demand of fuel
- start fuel limiting
- movement of the actuator for testing of the dynamics
- configuration of the two communication ports
One output for the actuator and both analog outputs can be configured to output one of several different signals. All of the analog inputs and outputs can be fully adjusted.
Caterpillar Information System:
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
723PLUS Digital Speed Control Hardware Options
3176C and 3196 Marine Engines Engine Oil Filter Base
2000/01/01 Cooling System Venting Procedure {1350}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 13 Engine Oil Pressure calibration required
723PLUS Digital Speed Control Control Options
3176C Engine Maintenance Interval Schedule
3114, 3116 and 3126 MUI Engine Governors Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3306B Industrial Engine Maintenance Interval Schedule
2000/01/01 New Shafts In Water Pump Groups Provide Increased Torsional Strength {1361, 1389}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 04 Engine Coolant Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 03 Injector Actuation Pressure voltage high
2000/01/01 Corrections to Operation and Maintenance Manual, SEBU6759-02 , "Maintenance Interval Schedule" and Corrections to Operation and Maintenance Manual, SEBU6759-02 , "Maintenance Recommendations" {7519}
3408E and 3412E Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0174 FMI 03 Fuel Temperature open/short to +batt
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines CID 0168 FMI 00 System Voltage High
723PLUS Digital Speed Control Accessories
2000/02/01 New Oil Filter Base Group {1306}
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Flywheel Inverter Module - Remove and Install
Uninterruptible Power Supply (UPS) 250 Contactor - Remove and Install