Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
Note: This removal procedure requires the use of a 9U-6880 Throttle Lever Tool Gp to be installed on the 1U-7326 Governor Calibration Bench.
Show/hide table
Required Tools     | |||
---|---|---|---|
Item     | Part Number     | Part Description     | Qty     |
A     | 9U-6876     | Puller Stud     | 1     |
B     | 9U-6874     | Bracket     | 1     |
C     | 9U-6875     | Shoulder Bolt     | 2     |
Show/hide table
Illustration 1 | g00667450 |
Part of the 9U-6880 Throttle Lever Tool Gp |
- Install puller bracket (B), shoulder bolts (C) and puller stud (A) onto throttle lever (1) .
Show/hide table
Illustration 2 | g00667519 |
- Tighten puller stud (A) in order to remove throttle lever (1) from the governor.
Show/hide table
Illustration 3 | g00667615 |
Caterpillar Information System:
3306B Industrial Engine Maintenance Interval Schedule
2000/01/01 New Shafts In Water Pump Groups Provide Increased Torsional Strength {1361, 1389}
3176C Industrial Engine Fan Drive - Install
3176C Industrial Engine Fan Drive - Remove
3512 Industrial Engine Flywheel
723PLUS Digital Speed Control Application
G3304 and G3306 Engines Test Tools for the Electrical System
723PLUS Digital Speed Control Declaration of Incorporation
723PLUS Digital Speed Control Introduction
3114, 3116 and 3126 MUI Engine Governors Governor (Type VI) - Adjust
3126B Engines for Caterpillar Built Machines Unit Injector - Install
3500 Industrial Engines Cylinder Block
3176C Engine Maintenance Interval Schedule
723PLUS Digital Speed Control Control Options
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 13 Engine Oil Pressure calibration required
2000/01/01 Cooling System Venting Procedure {1350}
3176C and 3196 Marine Engines Engine Oil Filter Base
723PLUS Digital Speed Control Hardware Options
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 06 Injector Actuation Valve short to ground
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
723PLUS Digital Speed Control Software Options
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 04 Engine Coolant Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 03 Injector Actuation Pressure voltage high