0105-00 High Intake Manifold Air Temperature Warning (64)
产生此代码的情况:
ECM 检测到下述情况时：
- 进气歧管空气温度高于 90 °C (194.0 °F) 四秒以上。
- 发动机至少已经运转了 30 秒钟。
- 发动机冷却液温度高于 99 °C (210.0 °F)。
系统响应:
电子维修工具在 "Intake Manifold Air Temperature（进气歧管空气温度）"状态旁显示 "DIAG"。 如果将 "Engine Monitoring Lamps（发动机监测指示灯）"参数编程为 "Warning Lamp（警告灯）"，则警告灯将点亮。 如果将 "Engine Monitoring Lamps（发动机监测指示灯）"参数编程为 "Option 1（选项 1）"，检查发动机指示灯将点亮。
清除此诊断代码时需要使用用户密码。
无
该诊断代码说明进气歧管温度过高。
测试步骤 1. 检查后冷器
- 检查空冷后冷器中有无碎屑和/或气流阻塞。
预期结果:
空冷后冷器中没有气流阻塞。
结果:
- 正常 - 没有气流阻塞。
修复: 确定高温原因。 重载和高环境空气温度可能导致温度高于触发点。
停止
- 异常 - 有气流阻塞。
修复: 清除气流阻塞物。确认修理已排除故障。
停止
Caterpillar Information System:
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0100-11 Very Low Oil Pressure (46)
3512 Industrial Engine Maintenance Interval Schedule
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0100-01 Low Oil Pressure Warning (46)
3512 Industrial Engine Reference Numbers
SR4 and SR4B Generators and Control Panels Reference Numbers
3126E Engine for Combat and Tactical Vehicles 0084-00 Vehicle Overspeed Warning (41)
Customer Communication Module (CCM) for Diesel Engines Programming Examples for M5X Protocol
SR4 and SR4B Generators and Control Panels Generator Identification
C15 and C18 Petroleum Generator Sets Generator Isolating for Maintenance
3126B and 3126E On-highway Engines 0110-04 Coolant Temperature voltage low (27)
3126B and 3126E On-highway Engines 0110-03 Coolant Temperature voltage high (27)
3126B and 3126E On-highway Engines 0105-04 Intake Manifold Air Temperature voltage low (38)
Customer Communication Module (CCM) for Diesel Engines Reference Material
Customer Communication Module (CCM) for Diesel Engines Password - Enable and Disable
3406E, C-10 and C-12 On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-00 High Coolant Temperature Warning (61)
Customer Communication Module (CCM) for Diesel Engines Initialization for Direct Connection
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-11 Very High Coolant Temperature (61)
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Injection Control Linkage - Remove
Customer Communication Module (CCM) for Diesel Engines Initialization for Remote Connection with Modem
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Injection Control Linkage - Install
3608 Engine Sea Water Strainer - Clean/Inspect
3406E, C-10 and C-12 On-highway Engines No Diagnostic Code Detected (55)
3608 Engine Engine Oil - Change