0091-13 Throttle Position out of calibration (28)
产生此代码的情况:
电子控制模块 (ECM) 检测到下述情况之一:
- 供给油门踏板位置传感器的信号的工作负载循环低于 5% 或高于 95%。
系统响应:
ECM 在检测到故障后会使发动机恢复到低怠速。 该故障诊断代码为激活状态时,卡特彼勒电子技师 (ET) 状态屏上"油门位置"旁边会显示"0%"和"诊断"。
该故障诊断代码为激活状态时,发动机会一直保持在低怠速下。
测试步骤 1. 进行以下的诊断步骤: 油门踏板(油门)位置传感器电路 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0030-13 PTO Throttle Sensor Calibration (29)
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0030-08 Invalid PTO Throttle Signal (29)
3054B Industrial Engine Piston Cooling Jets - Remove and Install
3126B Marine Engine Turbocharger - Install
3126B Marine Engine Turbocharger - Remove
3126B and 3126E On-highway Engines 0168-02 ECM Battery Power Intermittent (51)
3126B Marine Engine Water Pump - Assemble
3126B Engines for Caterpillar Built Machines Crankshaft Gear - Remove and Install
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Glossary
3512B Marine Auxiliary Engine Black Start Push Button
SR4 HV and SR4B HV Generators Rotating Rectifier - Check
SR4 HV and SR4B HV Generators Continuous Operation
3408E and 3412E Industrial Engines Electronic Service Tools
3126B and 3126E On-highway Engines 0084-01 Vehicle Speed loss of signal (31)
3126B and 3126E On-highway Engines 0084-02 Vehicle Speed signal invalid (36)
3126B and 3126E On-highway Engines 0084-08 Vehicle Speed signal out of range (36)
Uninterruptible Power Supply (UPS) 250 Time and Date Adjustment
3618 Engine Cylinder Liner - Install
3126B Marine Engine Auxiliary Water Pump - Disassemble
3126B and 3126E On-highway Engines 0084-10 Vehicle Speed signal rate of change (36)
3126B Marine Engine Exhaust Manifold - Remove and Install
3054B Industrial Engine Cylinder Head - Remove
Uninterruptible Power Supply (UPS) 250 Oil - Change
Uninterruptible Power Supply (UPS) 250 Display Contrast Adjustment